| Bande de fréquence | AU915 |
| ACT (LTE) | Status: Slow flicker (200 ms bright / 1800 ms dark); Description: Searching for network (unregistered); Status: Slow flicker (1800 ms bright / 200 ms dark); Description: Idle (registered to network); Status: Fast flicker; Description: Data transmitting or receiving |
| Antenne | External antennas for LoRa®, Wi-Fi, GPS, and LTE |
| Liaison de collecte | Wi-Fi, LTE (for the 8-channel version) and Ethernet |
| Cellular Feature (optional) | Nano SIM Card: 12 mm x 9 mm x 0.67 mm; Supports Quectel EG95-E / EG95-NA (IoT / M2M -optimized LTE Cat 4 Module); LTE Radio: Refer to the LTE Radio Specifications section for detailed information; Available only on RAK7240CV2 8-channel variant |
| Certifications | anatel, CE, FCC, IC, RCM, RoHS |
| Calcul | MT7628, DDR2RAM 128 MB |
| Console | USB Type-C port for debugging and maintenance; Short press : Reboot the gateway; Long press (≥5 sec) : Restores factory settings |
| Réglage du code pays | Network: 802.1q; Management: LoRa Packet Forwarder |
| Enregistreur de données | Network: Firewall; Management: MQTT Bridge |
| DC Input (Optional) | 9–24 V DC power input (only on DC-input models) |
| Dimensions | 224 mm x 121 mm x 42 mm Gateway only (no antenna, no bracket) |
| EG95-E for EMEA Region | LTE FDD: B1 / B3 / B7 / B8 / B20 / B28A; WCDMA: B1 / B8; GSM: 900 / 1800 MHz |
| EG95-NA for North America Region | LTE FDD: B2 / B4 / B5 / B12 / B13; WCDMA: B2 / B4 / B5 |
| Matériau du boîtier | Aluminum |
| ETH | Status: ON; Description: Link is up; Status: OFF; Description: Link is down; Status: Flicker; Description: Data transmitting or receiving |
| ETH (PoE) | 10/100 Mbps Ethernet port with IEEE 802.3af PoE input support |
| Réglage de la bande de fréquences | Network: LTE APN Setup; Management: Firmware update |
| Gateway OTA management | Network: Wi-Fi AP mode; Management: WisDM |
| GPS | GPS antenna connector |
| Plot de masse | Grounding point for ESD and lightning protection |
| Protection contre les infiltrations | IP65 |
| Mode d'installation | Pole or wall mounting |
| Voyants LED | WLAN, STAT, ACT, LoRa, ETH, PWR indicators for device and module status |
| Réglage de la localisation | Network: DHCP Server/Client; Management: OpenVPN, Ping Watch Dog |
| Logo | Without Logo |
| LoRa | LoRa® antenna connector |
| Fonctions LoRa | SX1303 mPCIe card (connects a maximum of two); 8 Channels (16 channels optional); Frequency: EU868/IN865/RU864/US915/AU915/KR920/AS923-1/2/3/4/EU433/CN470; The 16-channel variant does not support EU433 or CN470.; LoRa Radio: Refer to the LoRa Radio Specifications section for detailed information |
| LoRa package forward (packet forwarder, Basics Station) | Network: Wi-Fi Client mode; Management: SSH2, NTP |
| LTE-DIV / LoRa2 | LTE diversity antenna or LoRa2 antenna connector (used as LoRa2 on 16-channel) |
| LTE-MAIN | LTE main antenna connector (available only on RAK7240CV2 models) |
| NanoSIM | Available only on LTE-enabled models (RAK7240CV2); slot is present on all models for hardware compatibility |
| Fréquence de fonctionnement | EU868; IN865; RU864; US915; AU915; KR920; AS923-1/2/3/4; EU433; CN470; (Supported frequency depends on the model selected) |
| Humidité de fonctionnement | 0% to 95% (non-condensing) |
| Température de fonctionnement | -30˚ C to ﹢55˚ C |
| Canaux de fonctionnement | 2.4 GHz: 1-13 |
| Alimentation | PoE (IEEE 802.3af), 42 ~ 57 V DC; 9 ~ 24 V DC from dedicated DC port (available on DC-input models only); Compatible with RAK Solar Battery Kit (available on DC-input models only); Power consumption: 12 W (typical) |
| PWR | Status: ON; Description: Gateway is powered on; Status: OFF; Description: Gateway is powered off |
| Sensibilité du récepteur | -139 dBm (Min) |
| Sensibilité du récepteur (typique) | 802.11b; 1 Mbps: - 95 dBm; 11 Mbps: - 88 dBm; 802.11g; 6 Mbps: - 90 dBm; 54 Mbps: - 75 dBm; 802.11n (2.4 GHz); MCS0 (HT20): - 89 dBm; MCS7 (HT20): - 72 dBm; MCS0 (HT40): - 86 dBm; MCS7 (HT40): - 68 dBm |
| STAT; (16 channels only) | Status: ON; Description: LoRa2 module active; Status: OFF; Description: LoRa2 module inactive; Status: Flicker; Description: Transmitting or receiving LoRa packets |
| Statistiques | Management: WEB UI |
| Humidité de stockage | 0% to 95% (non-condensing) |
| Température de stockage | -40˚ C to ﹢85˚ C |
| Carte TF (microSD) | Pre-installed 16 GB or 32 GB microSD card for log storage and uplink frame buffering. Capacity may vary by production batch.; ⚠️ WARNING; Do not eject the SD card located in the SD card slot during installation, as it stores logs and data essential for the device' s performance. |
| Puissance d'émission | 27 dBm (Max) |
| Réglage de la puissance d'émission | Network: Uplink backup; Management: Built-in Network Server |
| Variante | 8 Channels with 4G(EC25-AU for Latin America/Australia/New Zealand)/DC and Battery Plus Support |
| Poids | 1.3 kg |
| Wi-Fi | External Wi-Fi antenna connector |
| Fonctions Wi-Fi | Frequency: 2.400-2.4835 GHz (802.11b/g/n); Operation Channels: 1-13; Wi-Fi Radio: Refer to the Wi-Fi Radio Specifications section for detailed information |
| Norme sans fil | IEEE 802.11b/g/n |
| Technologies sans fil | GPS, LoRaWAN, LTE, Wi-Fi |
| WLAN | Status: On; Description: Wi-Fi is enabled; either AP mode or STA mode is active.; Status: Off; Description: Wi-Fi is disabled; both AP mode and STA mode are inactive.; Status: Flashing; Description: Data transmitting or receiving |