AC10
Variateur de fréquence compact 0,75 à 22 kW

- Température de stockage
- -30 ~ +60℃
Variateur de fréquence compact 0,75 à 22 kW
Le variateur de fréquence AC10 de Veichi pilote des moteurs asynchrones et synchrones de 0,75 à 22 kW, en monophasé 220 V ou triphasé 220 V et 380 V, dans un boîtier compact.
Variateur de fréquence Veichi AC10. Le variateur de fréquence AC10 de Veichi est une série de variateurs de fréquence de type AC Drive à boîtier étroit, conçue pour la miniaturisation et la fiabilité. Il est proposé en monophasé 220 V 50/60 Hz de 0,75 à 2,2 kW, en triphasé 220 V 50/60 Hz de 0,75 à 2,2 kW et en triphasé 380 V 50/60 Hz de 0,75 à 22 kW.
Caractéristiques principales. Commande vectorielle sans PG et commande V/F, plage de fréquence de sortie de 0 à 599 Hz, fréquence porteuse de 1,0 à 16,0 kHz, couple de démarrage de 150 % du couple nominal à 0,5 Hz, temps de réponse en couple inférieur à 20 ms, rendement supérieur ou égal à 96 %, facteur de puissance supérieur ou égal à 0,94 avec réactance CC. Les courbes d'accélération et de décélération sont linéaires ou en S, avec quatre jeux de temps. Le freinage par injection CC et la régulation PID sont intégrés. Indice de protection IP20, refroidissement par air forcé.
Interfaces et connectivité. Entrées de commande pour marche, arrêt, marche avant et arrière, jog, multi-vitesses et arrêt libre. Sorties externes comprenant 1 sortie relais, 1 sortie collecteur et 1 sortie analogique AO sélectionnable en 0-10 V, 0-20 mA ou 4-20 mA. Communication RS485 intégrée, entrée à impulsions PUL, copie rapide des paramètres avec le clavier externe.
Alimentation et environnement. Tension de sortie de 0 à la tension d'entrée, avec erreur inférieure à 5 %. Plage de température de -10 °C à +50 °C, déclassement possible au-delà de 40 °C et température maximale de 60 °C en fonctionnement à vide. Humidité de 5 % à 95 % HR sans condensation. Installation murale, sur rail ou latérale. Altitude inférieure à 1000 m, avec déclassement de 1 % par tranche de 100 m au-delà.
Usages typiques. Pompage, ventilation et entraînement de machines où la régulation de vitesse et le démarrage progressif sont requis, avec commande et supervision par bus RS485.
Intégration. Conformité CE (EMC et LVD) selon les certificats du fabricant. Atlas Electronics fournit ce variateur sur devis.
Aucune question publiée sur cette référence pour l'instant. Les questions sont relues avant publication.
Retrouvez toutes les caractéristiques enregistrées pour AC10, avec leur origine. Utilisez les filtres pour trouver rapidement l'information voulue.
| Caractéristique | Valeur |
|---|---|
| AC10 Series AC Drive Catalog V1.2 — Catalog — English — PDF — 2024-02-20 | 2.48MB |
| AC10 Series AC Drive EPLAN Data — EPLAN — English — ZIP — 2026-09-03 | 2.04GB |
| AC10 Series AC Drive Manual (Simplified) V1.3 — Manual — English — PDF — 2026-03-12 | 1.9MB |
| AC Drive Firmware Upgrade Software V3.4.11 — Software — English — ZIP — 2023-09-07 | 1.91MB |
| AC Drive PC Software V1.0 — Software — English — ZIP — 2026-04-21 | 50.4MB |
| Acceleration and deceleration curve | Two ways: linear acceleration and deceleration, S curve acceleration and deceleration; Four sets of acceleration and deceleration time, the time unit is 0.01s, the longest is 65000s |
| Allow fluctuation | Voltage imbalance rate: <3%; Frequency: ±5%; Distortion rate meets IEC61800-2 requirements |
| Automatic current limit | Automatically limit the current during operation to prevent frequent over-current fault trips |
| Automatic energy-saving operation | Under V/F control mode, the output voltage is automatically optimized according to the load to realize energy-saving operation |
| Automatic voltage adjustment | When the grid voltage fluctuates, it can automatically keep the output voltage constant |
| Carrier frequency | 1.0~16.0kHz |
| CE (EMC) of AC10 AC Drive — Certificate — English — PDF — 2025-12-08 | 2.55MB |
| CE (LVD) of AC10 AC Drive — Certificate — English — PDF — 2025-12-08 | 2.35MB |
| Closing impulse current | Less than rated current |
| Cooling Method | Forced air cooling |
| Corporate | Corporate products and information |
| DC braking capability | Starting frequency: 0.00~50.00Hz; Braking time: 0.0~60.0s; Braking current: 0.0~150.0% of rated current |
| Drive efficiency | ≥ 96% |
| Energy Storage Solution | Residential, C&I energy storage system solutions. |
| Error alarm | Overvoltage, undervoltage, overcurrent, short circuit, phase loss, overload, overheating, overvoltage stall, current limit, data protection damaged, current fault operating status, historical fault |
| Exhibitions | VEICHI exhibitions, bringing you first-hand information. |
| External output signal | 1 relay output, 1 collector output, 1 AO output can be selected as 0~10V or 0~20mA or 4~20mA output |
| Feedback input channel | Keyboard potentiometer, voltage/current terminal AI, communication setting, pulse input PUL |
| Frequency accuracy | Digital setting: maximum frequency×±0.01%; analog setting: maximum frequency×±0.2% |
| Frequency resolution | Digital setting: 0.01Hz; Analog setting: maximum frequency×0.05% |
| Frequency setting channel | Keyboard digital setting, keyboard potentiometer, analog voltage/current terminal AI, communication setting and multi-channel terminal selection, combination of main and auxiliary channels, which can be switched in various ways |
| Input command signal | Start, stop, forward and reverse rotation, jog, multi-speed, free stop, reset, acceleration and deceleration time selection, frequency setting channel selection, external fault alarm |
| Mode d'installation | Wall-mounted |
| Installation site: | If the altitude is lower than 1000 meters, derating for use above 1000 meters, derating by 1% for every 100 meters; No condensation, icing, rain, snow, hail, etc., solar radiation less than 700W/m2, pressure 70~106kPa |
| Instantaneous power failure processing | In case of instantaneous power failure, uninterrupted operation is realized through bus voltage control |
| LED Display | Built-in keyboard: single-line 5-digit digital tube display, it can monitor the status of 1 drive; External keyboard: dual-line 5-digit digital tube display, it can monitor the status of 2 drive |
| Low-voltage General-purpose AC Drives Catalog — Catalog — English — PDF — 2026-06-08 | 6MB |
| Modulation | Optimize space vector PWM modulation |
| Motor control mode | V/F control without PG, vector control without PG |
| Output frequency accuracy | ±0.5% of maximum frequency value |
| Output frequency range | 0~599Hz |
| Overload Capacity | T3 model: 150% rated current for 89s, 180% rated current for 10s, 200% rated current for 3s; T/S2 model: 150% rated current for 24s, 180% rated current for 3.4s |
| Parameter copy | The function code information of the drive can be uploaded and downloaded to realize fast parameter copy (only external keyboard) |
| Power Factor | ≥ 0.94 (with DC reactor) |
| Classe de protection | IP20 |
| Rated Output Voltage | Using the power supply voltage compensation function, the rated motor voltage is 100%, which can be set in the range of 50 to 100% (the output cannot exceed the input voltage) |
| Run command channel | Operation panel setting, external terminal setting, communication setting |
| Servo System | Servo motor drive system products and solutions. |
| Single phase 220V 50/60Hz | 0.75kW - 2.2kW |
| Solar Irrigation System | Solar irrigation system products and solutions. |
| Speed control range | Vector control without PG, rated load 1:100 |
| Standard function | PID control, speed tracking and restart after power failure, jump frequency, frequency upper and lower limit control, program operation, multi-speed, RS485, analog output, frequency pulse output, parameter access level setting, common parameter setting, monitoring parameter comparator output, Counting and timing function, swing frequency function |
| Starting torque | Vector control without PG: 150% rated torque at 0.5Hz |
| Steady-state speed accuracy | Vector control without PG: ≤ 2% of rated synchronous speed |
| Température de stockage | -30 ~ +60℃ |
| Temperature and humidity | from -10℃ to +50℃, derating can be used above 40℃, the maximum temperature is 60℃ (no-load operation); 5% ~ 95%RH(No condensation) |
| The output voltage | Output under rated conditions: 3-phase, 0~input voltage, error less than 5% |
| Three phase 220V 50/60Hz | 0.75kW - 2.2kW |
| Three phase 380V 50/60Hz | 0.75kW - 22kW |
| Torque boost | Automatic torque increase 0.0%~100.0%; manual torque increase 0.0%~30.0% |
| Torque control | Torque setting calculation, torque mode speed limit |
| Torque response | Vector control without PG: <20ms |
| V/F curve | Vector Four methods: linear torque characteristic curve, self-set V/F curve, reduced torque characteristic curve (1.1~2.0 power), square V/F curve |
| Voltage and frequency | Single-phase 220V 50/60Hz; Three-phase 380V 50/60Hz; Three-phase 220V 50/60Hz |
Aucune spécification ne correspond.
Dernière vérification : 2026-11-02
Les documents officiels et les données techniques enregistrées pour AC10. Pour un document manquant ou une version précise, nos experts vous le transmettent.
Le variateur de fréquence AC10 de Veichi pilote des moteurs asynchrones et synchrones de 0,75 à 22 kW, en monophasé 220 V ou triphasé 220 V et 380 V, dans un boîtier compact.
| Paramètre | Valeur |
|---|---|
| AC10 Series AC Drive Catalog V1.2 — Catalog — English — PDF — 2024-02-20 | 2.48MB |
| AC10 Series AC Drive EPLAN Data — EPLAN — English — ZIP — 2026-09-03 | 2.04GB |
| AC10 Series AC Drive Manual (Simplified) V1.3 — Manual — English — PDF — 2026-03-12 | 1.9MB |
| AC Drive Firmware Upgrade Software V3.4.11 — Software — English — ZIP — 2023-09-07 | 1.91MB |
| AC Drive PC Software V1.0 — Software — English — ZIP — 2026-04-21 | 50.4MB |
| Acceleration and deceleration curve | Two ways: linear acceleration and deceleration, S curve acceleration and deceleration; Four sets of acceleration and deceleration time, the time unit is 0.01s, the longest is 65000s |
| Allow fluctuation | Voltage imbalance rate: <3%; Frequency: ±5%; Distortion rate meets IEC61800-2 requirements |
| Automatic current limit | Automatically limit the current during operation to prevent frequent over-current fault trips |
| Automatic energy-saving operation | Under V/F control mode, the output voltage is automatically optimized according to the load to realize energy-saving operation |
| Automatic voltage adjustment | When the grid voltage fluctuates, it can automatically keep the output voltage constant |
| Carrier frequency | 1.0~16.0kHz |
| CE (EMC) of AC10 AC Drive — Certificate — English — PDF — 2025-12-08 | 2.55MB |
| CE (LVD) of AC10 AC Drive — Certificate — English — PDF — 2025-12-08 | 2.35MB |
| Closing impulse current | Less than rated current |
| Cooling Method | Forced air cooling |
| Corporate | Corporate products and information |
| DC braking capability | Starting frequency: 0.00~50.00Hz; Braking time: 0.0~60.0s; Braking current: 0.0~150.0% of rated current |
| Drive efficiency | ≥ 96% |
| Energy Storage Solution | Residential, C&I energy storage system solutions. |
| Error alarm | Overvoltage, undervoltage, overcurrent, short circuit, phase loss, overload, overheating, overvoltage stall, current limit, data protection damaged, current fault operating status, historical fault |
| Exhibitions | VEICHI exhibitions, bringing you first-hand information. |
| External output signal | 1 relay output, 1 collector output, 1 AO output can be selected as 0~10V or 0~20mA or 4~20mA output |
| Feedback input channel | Keyboard potentiometer, voltage/current terminal AI, communication setting, pulse input PUL |
| Frequency accuracy | Digital setting: maximum frequency×±0.01%; analog setting: maximum frequency×±0.2% |
| Frequency resolution | Digital setting: 0.01Hz; Analog setting: maximum frequency×0.05% |
| Frequency setting channel | Keyboard digital setting, keyboard potentiometer, analog voltage/current terminal AI, communication setting and multi-channel terminal selection, combination of main and auxiliary channels, which can be switched in various ways |
| Input command signal | Start, stop, forward and reverse rotation, jog, multi-speed, free stop, reset, acceleration and deceleration time selection, frequency setting channel selection, external fault alarm |
| Mode d'installation | Wall-mounted |
| Installation site: | If the altitude is lower than 1000 meters, derating for use above 1000 meters, derating by 1% for every 100 meters; No condensation, icing, rain, snow, hail, etc., solar radiation less than 700W/m2, pressure 70~106kPa |
| Instantaneous power failure processing | In case of instantaneous power failure, uninterrupted operation is realized through bus voltage control |
| LED Display | Built-in keyboard: single-line 5-digit digital tube display, it can monitor the status of 1 drive; External keyboard: dual-line 5-digit digital tube display, it can monitor the status of 2 drive |
| Low-voltage General-purpose AC Drives Catalog — Catalog — English — PDF — 2026-06-08 | 6MB |
| Modulation | Optimize space vector PWM modulation |
| Motor control mode | V/F control without PG, vector control without PG |
| Output frequency accuracy | ±0.5% of maximum frequency value |
| Output frequency range | 0~599Hz |
| Overload Capacity | T3 model: 150% rated current for 89s, 180% rated current for 10s, 200% rated current for 3s; T/S2 model: 150% rated current for 24s, 180% rated current for 3.4s |
| Parameter copy | The function code information of the drive can be uploaded and downloaded to realize fast parameter copy (only external keyboard) |
| Power Factor | ≥ 0.94 (with DC reactor) |
| Classe de protection | IP20 |
| Rated Output Voltage | Using the power supply voltage compensation function, the rated motor voltage is 100%, which can be set in the range of 50 to 100% (the output cannot exceed the input voltage) |
| Run command channel | Operation panel setting, external terminal setting, communication setting |
| Servo System | Servo motor drive system products and solutions. |
| Single phase 220V 50/60Hz | 0.75kW - 2.2kW |
| Solar Irrigation System | Solar irrigation system products and solutions. |
| Speed control range | Vector control without PG, rated load 1:100 |
| Standard function | PID control, speed tracking and restart after power failure, jump frequency, frequency upper and lower limit control, program operation, multi-speed, RS485, analog output, frequency pulse output, parameter access level setting, common parameter setting, monitoring parameter comparator output, Counting and timing function, swing frequency function |
| Starting torque | Vector control without PG: 150% rated torque at 0.5Hz |
| Steady-state speed accuracy | Vector control without PG: ≤ 2% of rated synchronous speed |
| Température de stockage | -30 ~ +60℃ |
| Temperature and humidity | from -10℃ to +50℃, derating can be used above 40℃, the maximum temperature is 60℃ (no-load operation); 5% ~ 95%RH(No condensation) |
| The output voltage | Output under rated conditions: 3-phase, 0~input voltage, error less than 5% |
| Three phase 220V 50/60Hz | 0.75kW - 2.2kW |
| Three phase 380V 50/60Hz | 0.75kW - 22kW |
| Torque boost | Automatic torque increase 0.0%~100.0%; manual torque increase 0.0%~30.0% |
| Torque control | Torque setting calculation, torque mode speed limit |
| Torque response | Vector control without PG: <20ms |
| V/F curve | Vector Four methods: linear torque characteristic curve, self-set V/F curve, reduced torque characteristic curve (1.1~2.0 power), square V/F curve |
| Voltage and frequency | Single-phase 220V 50/60Hz; Three-phase 380V 50/60Hz; Three-phase 220V 50/60Hz |
Les réponses aux questions que les caractéristiques enregistrées de AC10 permettent de traiter. Une question n'est pas posée quand rien n'est enregistré pour y répondre.
Oui — enregistré sous « Standard function » : PID control, speed tracking and restart after power failure, jump frequency, frequency upper and lower limit control, program operation, multi-speed, RS485, analog output, frequency pulse output, parameter access level setting, common parameter setting, monitoring parameter comparator output, Counting and timing function, swing frequency function.
Oui — enregistré sous « Automatic voltage adjustment » : When the grid voltage fluctuates, it can automatically keep the output voltage constant.
Des références proches pour répondre à votre besoin. Comparez les principales caractéristiques. Un remplacement enregistré est une relation documentée ; un produit similaire n'est qu'une similarité, jamais une garantie de compatibilité.
Variateur de fréquence compact 0,75 à 22 kW




Décrivez votre application et vos contraintes dans une demande.
Ce qui est enregistré sur le statut réglementaire et la vie de cette référence.
| Statut actuel | Statut non communiqué |
| Dates clés | Non enregistrées |
| Référence fabricant | AC10 |
| Fabricant | Veichi |
Variateurs de fréquence AC
Variateur de fréquence CA triphasé
Prix sur demande
Variateurs de fréquence AC
Variateur de fréquence industriel 690 V triphasé IP54 · Réf. : SX-D64P0-EVA4
Prix sur demande
Variateurs de fréquence AC
Variateur de fréquence pour ascenseur 5,5 kW triphasé 380 V · Réf. : ME320LN-4005-SA-INT
Prix sur demande
Variateurs de fréquence AC
Variateur intégré pour ascenseur à communication CAN bus
Prix sur demande
Aucun cookie publicitaire ni de mesure d’audience. Un seul cookie, strictement nécessaire, est déposé si vous vous connectez à votre compte. Votre panier devis et votre comparaison restent dans votre navigateur. Détails