Role and importance in industrial systems
In any industrial or embedded architecture, selecting the right components and modules determines overall system reliability. These devices perform critical processing, power, or interfacing functions. Rigorous selection ensures service continuity even in demanding environments where voltage variations and electromagnetic interference occur regularly.
Atlas engineers select rugged references capable of uninterrupted operation across wide operational ranges. Initial design must account for thermal dissipation, interface availability, and compliance with industrial standards.
Key technical selection criteria
Analyzing a technical datasheet requires examining several decisive parameters. First, input voltage range and power efficiency must match typical industrial cabinet supplies, typically 24VDC or 12VDC. Furthermore, operating temperature ranges are critical for fanless enclosures or outdoor deployments.
Physical form factors and mounting methods represent another decisive criterion: TS-35 DIN rail mounting, rackmount chassis, or carrier board integration. Available communication interfaces must match site protocols, whether RS-485 serial buses, industrial Ethernet links, or CAN fieldbuses.
Sub-families and typical architectures
The catalogue includes diverse equipment categories tailored to each stage of the hardware chain. Key segments include power conversion modules, embedded processing boards, and communication gateways. Each family matches a specific integration level depending on whether the project requires off-the-shelf devices or integrable modules.
The Mactron Group TCS1330 (Desktop Monitors) addresses these field integration requirements and connects seamlessly to industrial networks.
The Mactron Group TCS1560 (Desktop Monitors) addresses these field integration requirements and connects seamlessly to industrial networks.
The Mactron Group TCS2150 (Desktop Monitors) addresses these field integration requirements and connects seamlessly to industrial networks.
Combining these modules inside a single enclosure requires verifying signal compatibility and addressing plan consistency.
Common design mistakes to avoid
A common mistake is underestimating peak power consumption during start-up or radio transmission phases, which causes unexpected voltage drops. Sizing power supplies with at least a 25 percent headroom margin is highly recommended.
Another critical pitfall is omitting galvanic isolation on extended fieldbuses. Without appropriate isolation, ground loops can damage transceiver ports on PLCs or gateways. Finally, heat dissipation inside sealed IP67 enclosures requires thorough verification of thermal derating curves.
Cabinet integration and electromagnetic compatibility
Installing hardware inside an industrial cabinet requires strict adherence to wiring rules and physical segregation between high-power conductors and low-voltage signal lines. Power cables and communication lines must use separate wiring ducts to minimize capacitive and inductive noise coupling.
Connecting functional earth to the TS-35 DIN rail must maintain minimal impedance. Utilizing noise suppression filters and ferrite cores across power supply conductors contributes significantly to preserving digital signal integrity over long operational cycles.
Atlas technical support and quotation
Atlas provides more than distribution: our technical engineers inspect your complete bill of materials and verify the technical fit of every device against your operational requirements. We validate electrical compatibility, interface wiring, and environmental ratings prior to procurement.
All supplies are provided on quotation. Submit your technical requirements, deployment constraints, and project schedule to receive an architecture review and a complete bill of materials quotation.
Frequently asked questions
How can I obtain a quotation for this hardware?
Submit your bill of materials or operational requirements to our engineers. Atlas provides a comprehensive quotation covering all hardware and support.
Is this hardware compliant with industrial standards?
Yes, all selected devices meet rigorous industrial standards for electromagnetic compatibility, temperature resilience, and electrical isolation.
Does Atlas provide integration support?
Our application engineers verify the technical coherence of your hardware architecture and advise you on selecting necessary wiring accessories.
What prerequisites are required for commissioning?
You must provide a regulated power source matching device specifications and establish an addressing plan for devices on the local network.
Products mentioned
V4
Embedded Monitors
3.97-inch magnetic mount vlog embedded monitor · Ref. : V4
- 1×HDMI
- 3.97", 800×480, 450nit
- 450cd/m2
Price on request
TK2380
Embedded Monitors
Industrial touch monitor 23.8 inch 1000 nits · Ref. : TK2380
- 2ch
- 10-point PCAP
Price on request
TCS1330
Desktop Monitors
Commercial 13.3-inch Full HD touch display monitor · Ref. : TCS1330
- 2x 2W Speaker
- 300 nits
- CE, FCC
Price on request
TCS1560
Desktop Monitors
Commercial 15.6-inch IPS PCAP touch display monitor · Ref. : TCS1560
Price on request
TCS2150
Desktop Monitors
Commercial touch display monitor 21.5-inch IPS Full HD · Ref. : TCS2150
Price on request
TCS1010
Desktop Monitors
10.1-inch commercial touch display monitor IPS 1280 x 800 · Ref. : TCS1010
Price on request
MD-185R
Embedded Monitors
Industrial 18.5-inch HD resistive touch monitor, 5-wire
- 2x 2W Speakers
- LED Type
- 30,000 Hrs
Price on request
MD-185P
Embedded Monitors
Industrial PCAP touch monitor 18.5-inch HD · Ref. : MD-185P
- 2x 2W Speakers
- LED Type
- 30,000 Hrs
Price on request
A project? Our engineers build the solution with you.
Send your requirements: Atlas proposes the architecture, the bill of materials and a quotation, then follows the supply.
Request a quotation