Regulation, connectivity, components
Articles for buyers and engineers: technical comparisons to choose between two generations, protection classes or interfaces, with catalogue products of each kind.
Technical comparisons56
Article4 G Cat 1 vs Cat 4: throughput vs power trade-offs for industrial IoTCompare 4 G LTE Cat 1 and Cat 4 throughput, MIMO antenna rules, sleep draw, and industrial router sizing before selecting IoT hardware.
ArticleARM System-on-Module vs x86 COM Express for custom carrier boardsCompare ARM SoMs, Jetson modules, and x86 COM Express Type 6/7/10 modules on power budget, PCIe lanes, Yocto Linux, and longevity.
ArticleBridging RS-485 Modbus RTU field devices to Modbus TCP and MQTTEngineering guide to bridge RS-485 Modbus RTU buses to Modbus TCP or MQTT, covering slave ID mapping, bus biasing, and timeout tuning.
ArticleCentimeter-level RTK GNSS positioning: base, rover and NTRIP correctionsEngineering guide to centimeter-level RTK GNSS: L1/L5 receivers, carrier-phase ambiguity, NTRIP or UHF RTCM 3 streams, and antenna ground planes.
ArticleChoosing an indoor or outdoor LoRaWAN gateway for sensor networksCompare 8- vs 16-channel SX 1302/SX 1303 gateways, IP67 vs indoor enclosures, LTE cavity filtering, PoE power, and cellular failover options.
ArticleCoaxial cables, connectors and RF link budget for industrial antennasCalculate RF link budgets at 868 MHz, 2.4 GHz and 3.5 GHz: cable loss per meter, 50 ohm impedance, connectors, bend radius and surge arresters.
ArticleDC vs AC UPS inverter: which backup power system for industrial racks?Compare DC UPS and AC UPS inverters for industrial racks: conversion efficiency, battery management, DIN rail footprint, and selection.
ArticleDifference between IP67 and IP65 enclosures: IEC 60529 explainedCompare IP65 and IP67 under IEC 60529 to specify industrial enclosures, cable glands, pressure vents, and chemical limits on quotation.
ArticleEMC Directive 2014/30/EU and EN 61000 standards in industrial cabinetsTechnical compliance guide to EMC Directive 2014/30/EU and EN 61000 immunity and emission rules for industrial control cabinet integration.
ArticleFanless box PC vs actively cooled industrial PC: thermal and dust trade-offsCompare fanless and fan-cooled industrial PCs across TDP limits, workshop dust, SSD endurance, and 9 to 36 V DC power before requesting a quote.
ArticleGDPR compliance for video surveillance and biometrics in enterprisesOperational guide to align enterprise IP cameras and video recorders with Regulation (EU) 2016/679, Article 9 rules, and EDPB Guidelines 3/2019.
ArticleGigE Vision vs USB3 Vision cameras for automated optical inspectionThis pre-purchase guide compares GigE Vision and USB3 Vision across cabling, bandwidth, CMOS shutters, C-mount lenses, and trigger I/O.
ArticleHow does a 4-20 mA transmitter work? Loop power and wiring rulesUnderstand how a 4-20 mA transmitter works, 2 wire vs 3/4 wire wiring, 250 ohm loop budget calculations, and live-zero fault signaling.
ArticleHow to choose a fanless industrial PC: CPU TDP, storage and I/OThis technical guide details thermal limits, CPU TDP, industrial SSD endurance, power protection, and isolated I/O for fanless PC selection.
ArticleHow to choose an industrial Panel PC: screen size, touch and sealingTechnical criteria to choose an industrial Panel PC: mounting, brightness, resistive or PCAP touch, IP65 sealing and compute power.
ArticleHow to choose an industrial Wi-Fi access point: roaming, antennas and IPTechnical guide to selecting an industrial Wi-Fi access point: radio standards, fast roaming, MIMO antennas, PoE power, and wide temperatures.
ArticleHow to choose hardware for Aerospace, Space & DefenceTechnical buying guide for selecting GNSS receivers, thermal cameras, and propulsion hardware for aerospace, space, and defence systems.
ArticleHow to choose hardware for Automotive & Electric MobilityTechnical buying guide for sizing on-board electronics, CAN bus telematics, GNSS/4 G LTE links, and AC or DC EV charging hardware on quotation.
ArticleHow to choose hardware for Data Centres & IT InfrastructureEngineering guide to sizing switching, optical links, rack power, edge security, and NVMe storage for data centres and IT infrastructure.
ArticleHow to choose hardware for Electronics & OEM/ODMOEM/ODM hardware buying guide: lifecycle planning, CE/RED radio compliance, and architecture trade-offs across modules, SoMs, and boards.
ArticleHow to choose hardware for Retail & CommerceTechnical guide to sizing POS terminals, kiosks, electronic shelf labels, and signage players for retail stores under real constraints.
ArticleHow to choose hardware for Robotics & AutomationTechnical buying guide for selecting PLCs, servo drives, cobots, LiDAR sensors, machine vision cameras, and HMIs for robotics automation.
ArticleHow to choose hardware for Telecom & NetworksThis guide details cellular band checks, RF link budgets, uplink redundancy and hardware families for sizing industrial telecom networks.
ArticleHow to evaluate an ARM Single Board Computer for embedded productsThis guide details how to evaluate an ARM Single Board Computer across Cortex-A cores, eMMC storage, Linux/Yocto support, and bus interfaces.
ArticleHow to select a DIN-rail power supply: power budget, derating and safetyEngineering criteria to select a 24 V DIN-rail power supply: load summation, thermal derating, AC input, SELV isolation, and redundancy.
ArticleIMU sensor explained: 6-axis vs 9-axis, drift and industrial usesUnderstand how an IMU sensor works, from 6-axis and 9-axis MEMS sensing to Kalman fusion, bias drift, CAN buses, and industrial use cases.
ArticleIP camera vs thermal camera: which vision technology for monitoring?Compare visible IP cameras and thermal sensors across darkness, fog penetration, temperature monitoring, storage load, and catalogue options.
ArticleIndoor air quality sensors: NDIR CO2, VOC and particulate measurementBuyer guide to selecting NDIR CO2, MOX VOC, and PM2.5/PM10 indoor air quality sensors and comparing LoRaWAN, BACnet, and Modbus wiring.
ArticleIndustrial remote access VPN: comparing IPsec, OpenVPN and WireGuardCompare IPsec, OpenVPN and WireGuard on industrial cellular routers: CGNAT traversal, crypto offload, OT firewalling and hardware selection.
ArticleIntegrating a 4 G LTE or 5 G M.2 / Mini-PCIe cellular modem in OEM hardwareEngineering guide covering M.2 vs Mini-PCIe buses, 3.3 V/3.8 V peak current rails, MHF 4/U.FL RF, SIM routing, and Linux QMI/ModemManager.
ArticleLoRaWAN vs NB-IoT: which LPWAN wireless standard for IoT sensors?Compare private LoRaWAN and carrier NB-IoT for IoT sensors: transmission energy, payload limits, indoor penetration, BOM and hardware.
ArticleOmnidirectional vs panel antenna: how to optimize industrial RF gainCompare omnidirectional vs panel antennas for 4 G/5 G, Wi-Fi, and LoRaWAN by radiation lobe, beamwidth, cable loss, and surge protection.
ArticlePoE vs local power: which power architecture for network devices?Compare IEEE 802.3af/at/bt PoE and local DIN rail power: power budgeting, cable voltage drop, cabling trade-offs, and quoted hardware.
ArticleProjected capacitive (PCAP) vs resistive touch HMI panels in factoriesThis technical comparison guides buyers between PCAP and 5 wire resistive HMI panels across gloves, fluids, IP65/IP66 sealing, and brightness.
ArticleRadio Equipment Directive RED and CE marking for wireless modulesThis guide outlines Directive 2014/53/EU (RED) obligations for integrating wireless modules and affixing CE marking to industrial equipment.
ArticleSizing a 24 VDC DIN-rail power supply for an industrial control cabinetCalculate nominal current, 150% peak boost, thermal derating above 50 °C, redundancy, and protection for a 24 VDC DIN-rail power supply.
ArticleSizing an IP network video recorder (NVR): bitrate, storage and PoEThis guide explains how to calculate H.264/H.265 bitrate, SATA retention, PoE power budgets and ONVIF compatibility when sizing an IP NVR.
ArticleThree-phase electrical submetering: current transformers and Modbus metersBuyer guide to selecting DIN-rail three-phase submeters, split-core or solid-core current transformers, and RS-485 Modbus polling setups.
ArticleUHF RFID readers and on-metal tags: solving reflections in industryEngineering guide to managing RF reflections for UHF RFID readers and on-metal tags: dipole detuning, ETSI channels, and DRM deployment.
ArticleUnderstanding EnOcean: architecture, standards & hardwareTechnical guide to EnOcean ISO/IEC 14543-3-10 architecture, EEP profiles, energy harvesting budgets, and BMS gateway integration criteria.
ArticleUnderstanding HART: architecture, standards & hardwareTechnical guide to the HART protocol: IEC layers, 4-20 mA and WirelessHART topology, loop impedance checks, pitfalls, and field instruments.
ArticleUnderstanding LiDAR: architecture, standards & hardwareTechnical LiDAR guide covering IEC 60825-1 and ISO 13849 standards, network topology, optical criteria, integration pitfalls and hardware.
ArticleUnderstanding MQTT: architecture, standards & hardwareThis guide explains MQTT architecture, OASIS v5.0 and ISO/IEC 20922 standards, TLS security, payload encoding and industrial gateway criteria.
ArticleUnderstanding PROFINET: architecture, standards & hardwareThis technical guide explains PROFINET standards, conformance classes, MRP ring topologies, and field hardware integration criteria.
ArticleUnderstanding Satellite IoT: architecture, standards & hardwareThis technical guide covers 3GPP NTN standards, network topology, integration criteria, and satellite terminals for industrial IoT deployments.
ArticleUnderstanding Wi-Fi HaLow: architecture, standards & hardwareThis technical guide explains IEEE 802.11 ah Wi-Fi HaLow architecture, sub-GHz design criteria, integration pitfalls, and related modules.
ArticleUnmanaged vs L2 managed industrial PoE switch: how to chooseCompare unmanaged and L2 managed industrial PoE switches on 802.1Q VLANs, RSTP/ERPS rings, PoE watchdog, and 12-48 VDC boost input.
ArticleWhat is a Modbus gateway and how does it bridge serial to TCP?Learn how a Modbus gateway converts RTU/ASCII frames to Modbus TCP/IP, handles RS-485 wiring, and routes slave IDs across industrial networks.
ArticleWhat is a System on Module (SoM)? Architecture vs SBC and custom PCBUnderstand System on Module architecture, compare SoM, off-the-shelf SBC, and chip-down PCB designs, and specify industrial ARM modules.
ArticleWhat is a machine vision camera? Sensors, shutter and interfacesThis technical guide defines machine vision cameras and details sensors, shutter modes, interfaces, and selection criteria on quotation.
ArticleWhat is a rugged tablet and how to evaluate IP65/MIL-STD specs?Technical guide to selecting rugged tablets: IP65/IP67 sealing, MIL-STD 810 mechanical durability, touchscreens, power, and catalog models.
ArticleWhat is an FPGA board? Logic cells, transceivers and selection criteriaThis guide explains how an FPGA board works, breaks down its hardware resources, and details technical criteria for board selection.
ArticleWhat is an HMI touch screen and how to select an operator panel?Technical guide explaining what an industrial HMI touch screen does and how to select display size, touch technology, PLC drivers, and IP65.
ArticleWhat is an industrial 4 G LTE router and how to deploy it reliably?This guide explains industrial 4 G LTE router architecture, hardware selection criteria, and key settings for reliable remote site connectivity.
ArticleWhat is an industrial Ethernet switch? DIN-rail, ring and PoEThis technical guide explains industrial Ethernet switch architecture, covering DIN-rail thermal ratings, dual DC power, ring failover, and PoE.
ArticleWiegand vs OSDP over RS-485: upgrading physical access control wiringCompare legacy Wiegand and SIA OSDP v2 over RS-485 to secure, supervise, and extend your physical access control wiring architecture.