Technologies
Discover the main connectivity and communication technologies for your industrial and embedded projects. Each page explains how it works, what to check when selecting hardware, and lists the matching catalog parts.
No technology matches this search.
CellularCellular network technologies for wide-coverage connected devices, from high throughput to low power. 5 technologies
4G LTE Fourth-generation cellular access standardised by 3GPP (LTE and LTE-Advanced).
5G Fifth-generation cellular access (New Radio) standardised by 3GPP.
LTE-M Low-power wide-area cellular technology for IoT (LTE Cat-M1) that supports mobility and voice-over-LTE, with lower data rates than mainstream LTE.
NB-IoT Narrowband cellular technology for low-throughput, delay-tolerant IoT devices with deep-coverage targets (LTE Cat-NB1 and Cat-NB2).
Satellite IoT Satellite IoT connectivity provides bi-directional data transmission in remote or offshore locations outside terrestrial cellular coverage through low earth orbit or geostationary satellite constellations. Short & long range wirelessWireless technologies for local connectivity, the connected home and low-power IoT. 8 technologies
LoRaWAN Open MAC-layer protocol maintained by the LoRa Alliance, running over LoRa modulation in sub-GHz ISM bands.
Wi-Fi Wireless LAN technology based on the IEEE 802.11 family; Wi-Fi 5 corresponds to 802.11ac and Wi-Fi 6 to 802.11ax.
Bluetooth Short-range wireless technology specified by the Bluetooth SIG, with Classic and Low Energy (BLE) variants.
GNSS Satellite positioning through one or more constellations such as GPS, Galileo, GLONASS and BeiDou.
Matter IP-based smart-home application layer from the Connectivity Standards Alliance, running over Wi-Fi, Thread and Ethernet.
Zigbee Low-power mesh networking stack from the Connectivity Standards Alliance built on IEEE 802.15.4, mainly in the 2.4 GHz band.
Wi-Fi HaLow Wi-Fi HaLow operates in the license-exempt sub-gigahertz spectrum to deliver extended transmission distance and deep obstacle penetration for low-power IoT sensor stations.
EnOcean EnOcean technology combines ultra-low-power radio transmitters with energy harvesting transducers using kinetic movement, solar light or temperature gradients to eliminate batteries. Wired networkingWired communication technologies for reliable, high-performance industrial and embedded networks. 6 technologies
Ethernet Wired LAN technology specified by IEEE 802.3, commonly at 10/100/1000 Mbit/s, with Power over Ethernet variants (802.3af, at, bt).
CAN bus Differential multi-drop serial bus (ISO 11898) used in vehicles and machinery.
RS-485 Differential serial physical layer (TIA/EIA-485) for multi-drop links over long cable runs, widely used under Modbus RTU and other fieldbus protocols.
Power over Ethernet (PoE) Delivery of DC power and data over the same twisted-pair Ethernet cable, specified by IEEE 802.3af, at and bt.
Fiber optic and SFP Optical links carried over fibre, usually through pluggable SFP and SFP+ transceivers in switches and media converters.
RS-232 Point-to-point serial interface (TIA/EIA-232) found on instruments, modems, barcode readers and legacy equipment. Industrial & building protocolsApplication protocols used by industrial equipment and building systems. 8 technologies
Modbus Application-layer request/response protocol for industrial devices, carried over serial lines (RTU/ASCII) or TCP/IP.
BACnet Building automation and control protocol standardised as ASHRAE 135 and ISO 16484-5, available over IP and MS/TP serial links.
4-20 mA current loop Analog signalling standard in which a measurement is carried as a current between 4 and 20 mA over two wires.
DALI Digital Addressable Lighting Interface: a two-wire control bus for luminaires and lighting devices, standardised in IEC 62386.
EtherCAT Real-time industrial Ethernet protocol in which a master sends a frame that each slave reads and writes on the fly.
KNX Open standard for building automation covering lighting, blinds, heating and ventilation.
HART Highway Addressable Remote Transducer protocol superimposes digital communication signals at low level on top of standard 4-20 mA analog instrumentation current loops.
PROFINET Process Field Net is an open Industrial Ethernet standard that coordinates distributed automation components, remote input-output peripherals and field instrumentation. Compute & AIProcessor architectures and AI at the edge for embedded systems. 3 technologies
Arm architecture Processor architecture family licensed by Arm: Cortex-M for microcontrollers, Cortex-A for application processors, Cortex-R for real-time cores.
RISC-V Open instruction-set architecture maintained by RISC-V International, implemented by several vendors in microcontrollers and application processors.
Edge AI Running neural-network inference on local hardware such as NPUs, GPUs and accelerator modules, usually quoted in TOPS for a given numeric precision. Embedded softwareOperating systems and build tools for embedded software. 3 technologies
Embedded Linux Linux kernel and userland on embedded boards and modules, usually delivered as a vendor board support package (BSP).
Yocto Project Build framework for custom embedded Linux distributions, extended by vendor layers that provide board support.
MQTT Message Queuing Telemetry Transport is an open publish-subscribe messaging transport designed for constrained devices, bandwidth-efficient telemetry and distributed IoT systems. Sensing & identificationIdentification, positioning and radar sensing technologies. 4 technologies
RFID and NFC Contactless identification by radio.
mmWave radar Radar sensing in the millimetre-wave bands that measures distance, speed and presence, including through plastic housings and in poor light, rain or dust.
Ultra-wideband (UWB) Short-range radio using very wide channels, which allows centimetre-level distance measurement by time of flight.
LiDAR Light Detection and Ranging instruments emit pulsed laser beams and measure time-of-flight reflections to produce accurate spatial coordinates and three-dimensional point clouds.