BUYING GUIDE

Selecting Industrial COM Express Modules: Form Factors and Pinouts

This technical guide explains how to select COM Express modules by evaluating form factors, pinouts, power budgets, and carrier interfaces.

Form Factor Classification Across Mini, Compact, and Basic Sizes

The COM Express standard defines modular computing architectures that decouple core computational silicon from application-specific carrier electronics. The PICMG specification outlines three primary physical sizes to match different spatial constraints and thermal envelopes. For handheld equipment and ultra-compact automation nodes, the COM Express Mini footprint measures 84 x 55 mm, as illustrated by the CompuLab COMEX-IE38 module.

When embedded systems require broader expansion buses and higher computational densities, the COM Express Compact standard measuring 95 x 95 mm provides a balanced footprint, exemplified by the Portwell PCOM-B659 module. For high-performance computing platforms requiring extensive board space for power distribution, the COM Express Basic standard offers dimensions of 125 x 95 mm. System integrators must evaluate internal mechanical clearance before selecting a specific form factor.

PICMG Pinout Selection Between Type 6 and Type 10 Interfaces

The connector pinout governs the electrical interfaces passed from the processor module to the baseboard. Type 10 pinout utilizes a single dual-row AB connector row, restricting total pin count to achieve miniaturization. This configuration routes essential digital displays and limited PCIe lanes for power-sensitive installations. The CompuLab COMEX-IE38 implements this architecture using the COM Express mini, pin-out Type 10 specification.

Conversely, the Type 6 pinout adds a secondary CD connector row, supplying high-density signal interconnects for multiple PCIe lanes, digital display interfaces, and high-speed USB ports. The CompuLab COMEX-IC50L uses this layout with its COM Express compact, pin-out Type 6 structure. This pinout configuration supports contemporary digital display pipelines like DisplayPort and eDP, providing versatility for multi-monitor industrial interfaces.

Processor Architectures, Memory Bandwidth, and Graphics Interfaces

Selecting computational silicon requires assessing CPU architecture, throughput capacity, and memory bus bandwidth. Demanding industrial computer vision tasks benefit from cutting-edge memory configurations. The Portwell PCOM-B659 provides high-speed DDR5 SO-DIMM up to 96 GB 5200 MT/s memory support alongside an onboard Intel I 226 series Ethernet controller, allowing deterministic packet routing across industrial field networks.

For edge analytics workloads, the Portwell PCOM-B65F features an Intel Core Ultra 9 processor with IBECC memory support for error correction. Its display engine supports an eDP up to HBR 3 and 2x DDI DP up to HBR 3 configuration. In contrast, the Portwell MEDM-B603 module incorporates an AMD Ryzen V1000 processor with Dual Channel DDR4 SO-DIMM Horizontal Socket Up to 32 GB, offering robust graphical processing for industrial automation cells.

Power Supply Input Ranges and Thermal Dissipation Requirements

Power supply architecture represents a vital consideration when integrating modular computers into industrial cabinets. Certain modules provide broad input tolerances, such as the CompuLab COMEX-IE38, which accepts an input voltage range of 4.7 V – 20 V with an active power consumption of 2 - 12 W depending on operating frequency. This broad input window simplifies integration in battery-powered or mobile vehicles.

Other computing platforms rely on a fixed DC voltage bus, like the CompuLab COMEX-IC50L operating on Single 12 V DC power while running an Intel Core i 3-5010 U processor with a 15 W TDP. Thermal dissipation requires selecting a matched heat spreader conforming to PICMG specifications. For extreme environments, the Portwell PCOM-B65F operates under harsh conditions with a min. operating temperature of -40 °C or lower, demanding precise chassis cooling alignment.

Common Signal Routing Pitfalls on Custom Carrier Boards

High-speed differential signaling presents the primary challenge during custom carrier board layout. Routing high-frequency PCIe and Ethernet signals requires strict impedance control and continuous ground reference planes to minimize reflections. On modules such as the Portwell MEDM-B603, the Ethernet interface relies on an Intel i 211 AT controller, requiring careful differential trace routing between the board-to-board connector and the magnetics.

Another frequent design error involves incorrect power sequencing between the carrier board and the core module. The manufacturer datasheet specifies exact timing delays for enable and power-good lines to protect internal silicon. Neglecting these power sequence requirements or misrouting high-speed DDI video pairs can lead to startup failures. System designers must thoroughly consult the component datasheet before releasing printed circuit board fabrication files.

Carrier Prototyping Workflows and Catalogue Exploration

Deploying a COM Express solution typically initiates with an off-the-shelf reference evaluation carrier in an ATX or Mini-ITX form factor. This early prototyping phase allows engineering teams to observe operating system behavior, UEFI firmware initialization, and peripheral driver compatibility prior to spinning custom hardware. Hardware design schematics and detailed mechanical step models provided by manufacturers guide engineering development and accelerate layout cycles.

The COM Express Basic, COM Express Compact, and COM Express Mini categories support an extensive range of computing applications. Atlas Electronics provides these computing modules on quotation to support your production scale-up and long-term lifecycle management. Review our modular computer catalogue to select the exact processing platform and pinout specification required for your next generation machine build.

Frequently asked questions

What is the primary difference between Type 6 and Type 10 pinouts?

Type 10 uses a single dual-row AB connector intended for compact systems with essential digital displays and limited PCIe lanes. Type 6 incorporates an additional CD connector row, providing broader PCIe lane counts, supplementary display ports, and multiple USB lines.

Why choose a Computer-on-Module approach instead of a single board computer?

Decoupling the processor core from application-specific I/O interfaces enables straightforward compute upgrades without redesigning the entire system carrier. It simplifies long-term machine maintenance and preserves carrier board investments.

How should thermal dissipation be evaluated for COM Express modules?

The buyer must check processor thermal design power in the component datasheet and select a standard heat spreader that matches PICMG mechanical specifications. Ambient operating temperatures determine whether passive heat spreaders or active cooling solutions are necessary.

Products mentioned

A project? Our engineers build the solution with you.

Send your requirements: Atlas proposes the architecture, the bill of materials and a quotation, then follows the supply.

Request a quotation

Related pages