PROJECT

System on Modules (SoM) & COM Express Compute Modules

Compare ARM SoM, NVIDIA Jetson, and COM Express modules for carrier board integration, thermal planning, and quotation requests.

Architecture of ARM SoMs, AI SoMs, and COM Express Modules

System on Modules (SoM) & Computer on Modules (CoM) separate the processor core, high-speed memory, and boot storage from the application-specific carrier board. This modular partitioning protects engineering effort on custom base PCB layouts whenever compute requirements scale across product generations. On ARM SOMs, software maintenance commonly relies on Yocto Project Linux distributions so teams retain control over kernel drivers and long-term security updates.

Depending on workload profile, buyers choose low-power ARM silicon such as the Geniatech SOM-IMX93-OSM built on an NXP i.MX93 with a 0.5 TOPS NPU, dedicated AI SOMs for edge computer vision, or x86 COM Express Modules when binary PC software compatibility is mandatory. For balanced industrial HMI and gateway nodes, the Geniatech SOM-3568J-OSM provides a quad-core ARM Cortex-A55 compute footprint.

Pinout Compatibility Across Generations and Standardized Footprints

Long-term carrier board reuse depends directly on selecting a well-defined mechanical and electrical module standard. Open form factors such as SMARC, OSM, and COM Express Modules enforce strict pin assignments for power rails, ground return paths, and differential pairs. On the Geniatech SOM-3568-SMARC, an 82 x 50 mm standardized footprint allows hardware refreshes without redesigning the underlying carrier board.

When evaluating pinout compatibility across SoM generations, buyers must check the manufacturer datasheet for I/O voltage domains, power-up sequencing tolerances, and secondary pin-multiplexing functions across shared banks. Carefully inspecting connector mating heights, board-to-board retention hardware, and mechanical keep-out areas ensures that upgraded compute modules fit existing enclosures and carrier layouts cleanly without electrical contention or assembly interference.

Allocation of PCIe, USB, Ethernet Lanes, and Industrial Buses

Carrier board architecture must faithfully route high-speed differential lanes from the compute module, including PCIe links for storage or capture cards, USB host ports, and Gigabit Ethernet interfaces. Both the Geniatech SOM-3568J-OSM and Geniatech SOM-IMX93-OSM provide 2 Ethernet ports and CAN bus support, simplifying network isolation between deterministic machine control buses and upstream plant telemetry.

For industrial HMI and automation controllers, the Geniatech SOM-3568-SMARC combines CAN bus and PoE with HDMI, LVDS, eDP, MIPI-DSI, and MIPI-CSI interfaces, while the Geniatech SOM-IMX93-OSM adds CAN-FD, UART, I2C, SPI, PWM, and GPIO. Where deterministic parallel logic is required, the MYIR MYC-JX8MMA7 pairs a Quad-core Cortex-A53 with an Artix-7 FPGA, 2 GB LPDDR4, 8 GB eMMC, 32 MB QSPI Flash, CAN bus, RS-232, and RS-485.

Thermal Envelope and Carrier Integration for Edge AI Workloads

Managing the thermal envelope determines sustained clock frequencies and solder-joint reliability under continuous industrial operation. Modules such as the Geniatech SOM-3568J-OSM operate down to -40 °C or lower, whereas the MYIR MYC-JX8MMA7 is rated for 0 °C or higher within an 82 mm x 45 mm footprint. Buyers must check datasheet power dissipation curves and chassis heat-spreader clearances before finalizing enclosure airflow.

Within NVIDIA Jetson SoM Modules (Orin Nano/NX/AGX) and edge-AI deployments, high inference throughput requires structured cooling. The Seeed Studio 110061363 packages a Jetson Xavier NX 8 GB delivering 21 TOPS and a 6-core NVIDIA Carmel ARMv8.2 CPU inside an aluminium case with a 5 V PWM fan, 1 Gigabit Ethernet port, HDMI Type A, DP, and 2 MIPI CSI-2 camera connectors. The Seeed Studio A205E adds 128 GB SSD, 2 Ethernet ports, CAN bus, RS-232, and RS-485.

Technical Selection Criteria and Quotation Request Workflow

Sourcing ARM SoMs, AI compute platforms, and COM Express modules happens strictly on quotation so memory capacities, onboard flash densities, and software lifecycle commitments align with equipment production schedules. Prior to locking carrier board schematics, engineering teams should review Yocto BSP or JetPack release notes, reference carrier schematics, and high-speed impedance routing rules published by the module vendor.

To initiate a supply quotation with Atlas Electronics, specify the target compute architecture, ambient temperature range, required PCIe, USB, Ethernet, and camera or display lane count, plus estimated annual deployment volume. Buyers should also inspect each datasheet for carrier power-rail sequencing thresholds, thermal interface material thickness, and board-to-board connector mating ratings to avoid late-stage hardware revisions.

Frequently asked questions

How can buyers maintain pinout compatibility across multiple SoM or COM Express generations?

Select an open standard such as SMARC, OSM, or COM Express, then compare vendor datasheets for I/O voltage domains, PCIe, USB, and Ethernet lane mappings, and carrier power-rail sequencing requirements before finalizing PCB routing.

When should a project choose an ARM SoM with Yocto over an x86 COM Express module?

An ARM SoM such as the Geniatech SOM-3568J-OSM or Geniatech SOM-IMX93-OSM fits low-power embedded systems running Yocto Project Linux, whereas x86 COM Express modules suit legacy x86 software stacks and higher PCIe lane budgets.

What thermal specifications should buyers inspect in the datasheet for industrial SoMs and Jetson devices?

Check minimum and maximum operating temperatures, such as -40 °C or lower on the Geniatech SOM-3568J-OSM versus 0 °C or higher on the MYIR MYC-JX8MMA7, alongside active or passive cooling provisions like the aluminium case and 5 V PWM fan on the Seeed Studio 110061363.

What technical details are needed to request a quotation for SoM or COM Express modules?

Provide the target module or architecture, memory and flash configuration, required interfaces such as CAN, RS-232, RS-485, Ethernet, CSI, or display outputs, ambient temperature range, and projected annual quantities.

Products mentioned

A project? Our engineers build the solution with you.

Send your requirements: Atlas proposes the architecture, the bill of materials and a quotation, then follows the supply.

Request a quotation

Related pages