Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

COD-208 – UV COD Sensor with RS485 Digital Output

UV COD Sensor with RS485 Digital Output

pH and Conductivity Analyzers

  • RS-485
Manufacturer part number
COD-208
Manufacturer
Apure

UV optical sensor at 254 nm for estimating COD in process monitoring of surface water or wastewater, with an isolated RS485 digital output.

Product overview

Overview. The Apure COD-208 is an online COD (chemical oxygen demand) analyser that uses UV optical measurement to estimate COD-related changes in water. It is supplied with a 254 nm UV channel and a reference channel for compensation.

Main characteristics. Two measuring ranges are offered depending on the version: 0 to 200 mg/L or 0 to 500 mg/L, with a resolution of 0.1 mg/L. Accuracy is listed as ±5%F.S. / 0.1mg/L. The operating temperature range is 0 to 45 °C, with a minimum operating temperature of 0 °C or higher. The standard cable length is 5 metres, other lengths can be customised.

Connectivity. The RS-485 digital output is isolated and protected. For integration, obtain the application protocol, register map, engineering units and receiving-device settings, as RS485 is a digital interface and not an analog current output.

Use and limitations. The sensor suits trend monitoring and process assessment after site validation. UV absorbance responds to UV-absorbing constituents and does not directly measure oxygen consumed in a chemical digestion. Calibration against representative samples and a reference COD laboratory method is required. A reading alone does not establish discharge compliance or drinking-water safety.

Maintenance. A cleaning brush is supplied to assist with fouling control of the optical windows. Automatic cleaning does not make the sensor maintenance-free, and periodic inspection and verification of readings remain necessary.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote