SALINITY-SENSOR
Water salinity sensor with RS485 electrode

Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
Water salinity sensor with RS485 electrode
Immersible electrode sensor measuring water conductivity, salinity and TDS, with RS485 Modbus-RTU output, for online water quality monitoring.
Fengtu FT-S7H. contact-electrode salinity sensor measuring the conductivity, salinity and TDS of water. It is intended for water quality monitoring of surface water, sewage, seawater and tap water.
Measurements. Conductivity from 0 to 30000 μS/cm (0-30 mS/cm) with a resolution of 1 μS/cm (0.01 mS/cm). Salinity from 0 to 10000 ppm (0-30 ppt) with a resolution of 1 ppm (0.01 ppt). TDS from 0 to 10000 ppm (0-30 ppt) with a resolution of 1 ppm (0.01 ppt). Measurement accuracy of ±1.5% and ±0.1°C, with automatic temperature compensation (M1820Z).
Output and connectivity. RS485 signal with MODBUS-RTU protocol, with internal signal isolation for strong interference resistance. Standard 5-metre cable, 4-core shielded: red for power, blue/black for ground, green for 485B and yellow for 485A.
Power and environment. Supply of 12-24 VDC, consumption of 0.4 W at 12 V. ABS case, IP68 waterproof rating. Usable at 0 to 50°C without freezing, at a pressure below 0.2 MPa.
Installation. Immersed installation via NPT 3/4 thread, for direct submersion or installation in pipes and tanks. The sensor must not be installed upside down or horizontally, and must be mounted at an angle of at least 15 degrees.
Typical uses. Continuous monitoring of salinity and TDS in natural waters, effluents and treatment installations, with integration into a PLC or supervision system via the Modbus-RTU bus. Periodic cleaning with a soft brush and distilled water followed by calibration is recommended, the interval being set by the operating conditions.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for SALINITY-SENSOR. For a missing document or a specific revision, our experts send it to you.
Immersible electrode sensor measuring water conductivity, salinity and TDS, with RS485 Modbus-RTU output, for online water quality monitoring.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Water salinity sensor with RS485 electrode

MPP1000 Multi-parameter analyzer

MDX500 Multi-parameter analyzer

SUP-ADP2400 Digital pH Sensor for Reliable Online Water Quality Monitoring

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SALINITY-SENSOR |
| Manufacturer | Fengtu |
pH and Conductivity Analyzers
RS485 Modbus Dissolved Oxygen Sensor, Fluorescence Method
Price on request
pH and Conductivity Analyzers
Online UV fluorescence BOD sensor, reagent-free · Ref. : WQ-BOD-4S
Price on request
pH and Conductivity Analyzers
Portable ORP analyzer with digital electrode and touch screen · Ref. : ORP-METER
Price on request
pH and Conductivity Analyzers
Multiparameter Water Quality Sensor · Ref. : KPS-400
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details