Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

E3NC – CMOS laser photoelectric proximity sensor with auto-tuning

CMOS laser photoelectric proximity sensor with auto-tuning

Photoelectric Proximity Sensors

Manufacturer part number
E3NC
Manufacturer
Omron

Omron E3NC photoelectric proximity sensor with a red laser, with separate sensor heads and amplifier units, for contactless object detection.

Product overview

Overview. The Omron E3NC photoelectric proximity sensor is a series of red laser (660 nm) sensor heads and amplifier units for contactless object detection. Series variants differ by sensing method: coaxial retro-reflective, diffuse-reflective with fixed or settable distance, or diffuse-reflective with variable spot, with measurement ranges from 35 to 250 mm for the distance-settable models.

Main characteristics. The spot diameter is 1 mm at 250 mm and 0.5 mm at 100 mm for the laser models. Four response time modes are available: 80 µs in super-high-speed mode, 250 µs in high-speed mode, 1 ms in standard mode and 16 ms in Giga-power mode. Detection relies on a red laser diode of Class 1 (JIS, IEC/EN and FDA).

Setting and functions. The amplifier units feature a 7-segment digital display with switchable display direction, an Eco mode that turns the displays off, smart tuning (2-point tuning, full auto tuning, position tuning, maximum sensitivity tuning, power tuning or percentage tuning, from −99% to 99%), a timer function from 1 to 9,999 ms, bank switching from banks 1 to 4, and Dynamic Power Control (DPC).

Power and environment. Supply voltage of 10 to 30 VDC ±10%, ripple (p-p) 10% maximum. Operating ambient temperature from −10 to 55 °C and storage from −25 to 70 °C, with no icing or condensation. Degree of protection IP50 per IEC 60529, IP65 for the versions indicated.

Integration. The NPN or PNP output variants connect via M8 or M12 connectors with 2 m or 30 cm PVC cable. An EtherCAT communication unit (E3NW-ECT) and a sensor dispersion unit (E3NW-DS) provide network connection and allow reading detected values from a programmable logic controller. Reflectors, mounting brackets and lens attachments are sold separately.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote