Typical industrial projects requiring variable frequency drives
Sourcing variable frequency drives supports diverse industrial projects, from compact conveyors and fans to heavy pumping stations and overhead cranes. On machinery rated from 0.75 to 22 kW, a compact drive such as the Veichi AC10 regulates standard motors inside control cabinets. For heavy hoisting applications reaching 220 kW on 380-480 VAC three-phase mains, the Inovance CS710-4T220G-INT provides crane-oriented drive capacity.
In dusty workshops or damp utility rooms, pumping, extraction, and crushing projects often call for mounting outside a sealed enclosure. The 200 kW 400 V Omron SX-D4200-E3FA4 and the 690 V Omron SX-D64P0-EVA4 address these installations with an IP54 protection rating. Buyers must check each datasheet to align shaft power, supply voltage, and site layout.
Operational risks of selecting an unsuitable variable frequency drive
Specifying the wrong variable frequency drive causes nuisance tripping, premature motor heating, or fieldbus integration deadlocks during commissioning. Installing an IP20 chassis unit such as the Inovance MD810-50M4T11G531-INT outside a filtered cabinet exposes power electronics to conductive dust and moisture. Overlooking an AC output reactor, which is absent on the MD810-50M4T11G531-INT but included on the CS710-4T220G-INT, also increases cable stress on long motor runs.
Selecting an inadequate control method or missing feedback hardware similarly disrupts startup schedules. Running a V/f control unit like the Omron SX-D64P0-EVA4 on an axis requiring high torque near zero speed produces load instability. The buyer must also verify in the datasheet whether an ABZ encoder interface is built in, as on the MD810-50M4T11G531-INT, or requires an expansion card.
Electrical ratings and environmental protection selection criteria
The first selection criterion covers three-phase input voltage and rated motor power. Available models span 380-480 V networks with the 11 kW Inovance MD810-50M4T11G531-INT and 220 kW CS710-4T220G-INT, 400 V lines with the 200 kW Omron SX-D4200-E3FA4, and 690 V industrial grids with the Omron SX-D64P0-EVA4. For modular OEM equipment, the Veichi AC10 covers 0.75 to 22 kW, while the Veichi AC310 delivers a three-phase output from 0 to input voltage with deviation below 5%.
The second criterion addresses ingress protection and ambient temperature limits. The Veichi AC10, Veichi AC310, Inovance MD810-50M4T11G531-INT, and CS710-4T220G-INT fall within the IP20 to IP44 range, with IP20 housings on the Inovance units and a -10 °C minimum operating temperature on the MD810-50M4T11G531-INT. Harsh-area units like the Omron SX-D4200-E3FA4 and SX-D64P0-EVA4 reach IP54.
Motor compatibility, control methods and industrial communication buses
The third criterion pairs the drive control method with compatible motor technology. Both the Omron SX-D4200-E3FA4 and Omron SX-D64P0-EVA4 support induction or asynchronous motors as well as permanent magnet motors, using vector control on the SX-D4200-E3FA4 and V/f control on the SX-D64P0-EVA4. The Inovance MD810-50M4T11G531-INT also provides vector control with a built-in ABZ encoder interface, whereas the CS710-4T220G-INT offers two analog inputs and supports the MD 38 PGMD encoder expansion card.
The fourth criterion evaluates communication interfaces required by the plant control system. The Omron SX-D4200-E3FA4 and SX-D64P0-EVA4 include Modbus and RS-485, the Veichi AC10 provides RS-485, and the Veichi AC310 combines RS-485, CAN bus, and Wi-Fi 5 connectivity. Both Inovance MD810-50M4T11G531-INT and CS710-4T220G-INT include Modbus. Buyers must verify in each datasheet which option cards or manuals apply to their controller.
Quotation workflow, compatibility checks and bill of materials sourcing
Atlas Electronics operates on quotation to quote and structure your Variable Frequency Drives (VFD) schedule from your electrical, mechanical, and network specifications. Our procurement team reviews line-by-line consistency against manufacturer datasheets, checking voltage class, IP20 or IP54 rating, RS-485, Modbus, or CAN bus interfaces, AC output reactor inclusion, and ABZ encoder requirements before issuing a formal commercial proposal.
Beyond the drives themselves, Atlas Electronics consolidates the supply of the remaining bill of materials around your power and automation cabinet. We source matching motors, expansion cards such as the MD 38 PGMD, line filters, enclosures, and technical documentation across Veichi, Omron, and Inovance ranges, including available EPLAN data and manuals by series, so your purchasing team receives one coordinated on-quotation package.
Frequently asked questions
When should a project specify an IP54 variable frequency drive instead of an IP20 unit?
An IP20 drive such as the Inovance MD810-50M4T11G531-INT or CS710-4T220G-INT requires mounting inside a protective electrical enclosure, whereas an IP54 unit like the Omron SX-D4200-E3FA4 or SX-D64P0-EVA4 resists dust and water splashes for direct plant mounting. Always verify the required IP rating in the datasheet.
How do V/f control and vector control differ in the listed VFD series?
V/f control, featured on the Omron SX-D64P0-EVA4, suits quadratic-torque loads such as fans and centrifugal pumps. Vector control, available on the Omron SX-D4200-E3FA4 and Inovance MD810-50M4T11G531-INT, is suited to applications needing steady torque at low speeds and tighter dynamic speed regulation.
What communication buses and encoder interfaces must buyers check before requesting a quotation?
Check the datasheet for built-in buses such as Modbus and RS-485 on the Omron SX units, RS-485 on the Veichi AC10, or CAN bus, RS-485, and Wi-Fi 5 on the Veichi AC310. Also check whether an ABZ encoder port is built in, as on the MD810-50M4T11G531-INT, or needs an MD 38 PGMD expansion card as on the CS710-4T220G-INT.
How does Atlas Electronics handle mixed bills of materials alongside variable frequency drives?
Send your list of Variable Frequency Drives (VFD) along with your peripheral component requirements. Atlas Electronics prepares an on-quotation proposal, checks parameter alignment against manufacturer datasheets, and handles the supply of the complementary bill of materials.
Products mentioned
MD810-50M4T11G531-INT
Variable Frequency Drives (VFD)
11 kW three-phase 380-480 V variable frequency drive with vector control · Ref. : MD810-50M4T11G531-INT
Price on request
CS710-4T220G-INT
Variable Frequency Drives (VFD)
220 kW crane variable frequency drive three-phase 380-480 VAC · Ref. : CS710-4T220G-INT
- ✔
Price on request
SX-D64P0-EVA4
Variable Frequency Drives (VFD)
Industrial 690 V three-phase variable frequency drive IP54 · Ref. : SX-D64P0-EVA4
- IP54
- V/f control
- 690 V three phase
Price on request
SX-D4200-E3FA4
Variable Frequency Drives (VFD)
200 kW three-phase 400 V vector control variable frequency drive · Ref. : SX-D4200-E3FA4
Price on request
AC10
Variable Frequency Drives (VFD)
Compact Variable Frequency Drive 0.75 to 22 kW · Ref. : AC10
- 50.4MB
- 2.48MB
- 2.04GB
Price on request
AC310
Variable Frequency Drives (VFD)
Series Variable Frequency Drive - AC Drive
Price on request
A project? Our engineers build the solution with you.
Send your requirements: Atlas proposes the architecture, the bill of materials and a quotation, then follows the supply.
Request a quotation
