SD-WORM
Industrial WORM SD memory card, write once, 8 to 128 GB

- Standard Operating Temperature (°C )
- -25 ~ + 85
- Interface
- SD 6.1
- Power consumption
- Active mode: 200 mA & Idle mode: 255 uA
- Power Consumption Active mode
- 200 mA & Idle mode: 255 uA
Industrial WORM SD memory card, write once, 8 to 128 GB
The Apacer SD-WORM industrial SD card protects data through write-once recording, with no possible erasure or modification. It suits secure storage of sensitive data.
Overview. The Apacer SD-WORM industrial SD card is a WORM (Write Once Read Many) SD memory card that allows data to be written once, preventing it from being erased, modified or overwritten. This write protection ensures that data cannot be tampered with once recorded.
Main characteristics. Capacity from 8 GB to 128 GB, MLC NAND flash, sequential read performance up to 75 MB/s and sequential write performance up to 65 MB/s. The controller includes a built-in advanced ECC algorithm, global wear leveling, flash bad-block management and power failure management, with page mapping as flash translation layer.
Interface and compliance. SD 6.1 interface, compliant with the Part 1 Physical Layer Specification Ver6.1 Final for the command list, and with the Part 3 Security Specification Ver3.0 Final for secure and non-secure areas. The card is compatible with the SD protocol.
Power and environment. Operating voltage from 2.7 V to 3.6 V. Power consumption of 200 mA in active mode and 255 µA in idle mode. Standard operating temperature from -25 °C to +85 °C, storage temperature from -40 °C to +85 °C. MTBF above 3,000,000 hours. Dimensions 32 x 24 x 2.1 mm.
Typical uses. Secure data storage requiring single write and protection against any alteration, such as voting machines, finance and legal applications, as indicated by the manufacturer.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SD-WORM, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Form factor | SD |
| Capacity | 8GB~128GB |
| Dimension(L x W x H) | 32 x 24 x 2.1 mm |
| ECC Engine | Built-in advanced ECC algorithm |
| Flash Translation Layer | Page Mapping |
| Interface | SD 6.1 |
| Model | SD-WORM |
| MTBF (hours) | >3,000,000 |
| NAND Flash Type | MLC |
| Operating Voltage | 2.7V ~ 3.6V |
| Power consumption | Active mode: 200 mA & Idle mode: 255 uA |
| Power Consumption Active mode | 200 mA & Idle mode: 255 uA |
| SD-WORM | 1.58 MB |
| Sequential Read Performance (MB/sec) | Up to 75 |
| Sequential Write Performance (MB/sec) | Up to 65 |
| Shock | 1,500G, 0.5ms |
| Standard Operating Temperature (°C ) | -25 ~ + 85 |
| Storage temperature(°C) | -40 ~ + 85 |
| Vibration | 20Hz~80Hz/1.52mm (frequency/displacement) 80Hz~2,000Hz/20G (frequency/accelerate) |
No specification matches.
Last verification : 2026-11-03
Official documents and the technical data recorded for SD-WORM. For a missing document or a specific revision, our experts send it to you.
The Apacer SD-WORM industrial SD card protects data through write-once recording, with no possible erasure or modification. It suits secure storage of sensitive data.
| Parameter | Value |
|---|---|
| Form factor | SD |
| Capacity | 8GB~128GB |
| Dimension(L x W x H) | 32 x 24 x 2.1 mm |
| ECC Engine | Built-in advanced ECC algorithm |
| Flash Translation Layer | Page Mapping |
| Interface | SD 6.1 |
| Model | SD-WORM |
| MTBF (hours) | >3,000,000 |
| NAND Flash Type | MLC |
| Operating Voltage | 2.7V ~ 3.6V |
| Power consumption | Active mode: 200 mA & Idle mode: 255 uA |
| Power Consumption Active mode | 200 mA & Idle mode: 255 uA |
| SD-WORM | 1.58 MB |
| Sequential Read Performance (MB/sec) | Up to 75 |
| Sequential Write Performance (MB/sec) | Up to 65 |
| Shock | 1,500G, 0.5ms |
| Standard Operating Temperature (°C ) | -25 ~ + 85 |
| Storage temperature(°C) | -40 ~ + 85 |
| Vibration | 20Hz~80Hz/1.52mm (frequency/displacement) 80Hz~2,000Hz/20G (frequency/accelerate) |
Points to check before using SD-WORM in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Voltage | 2.7V ~ 3.6V |
| Power consumption | Active mode: 200 mA & Idle mode: 255 uA |
| Power Consumption Active mode | 200 mA & Idle mode: 255 uA |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SD-WORM can answer. A question is not asked when nothing is recorded to answer it.
-25 ~ + 85 (source: Standard Operating Temperature (°C )).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Industrial WORM SD memory card, write once, 8 to 128 GB

SSD for the WisGate Connect — 128GB

SSD for the WisGate Connect — 512GB

USB 3.2

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SD-WORM |
| Manufacturer | Apacer |
Industrial SSDs
512GB NVMe M.2 SSD, PCIe Gen3 x2 industrial · Ref. : B00076
Price on request
Industrial SSDs
USB 3.2 Gen1 industrial flash drive 32 to 128 GB · Ref. : GEN1
Price on request
Industrial SSDs
128GB NVMe M.2 SSD, PCIe Gen3 x2 interface · Ref. : B00075
Price on request
Industrial SSDs
Industrial 2.5-inch SATA 3.2 SSD with instant recovery · Ref. : SV24C-25
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details