SDM5A 22P90D – SATA 3.2 SLC SSD Module 1 to 32 GB

SATA 3.2 SLC SSD Module 1 to 32 GB

NVMe SSDs

  • 0 ~ + 70
  • SATA 3.2 (6Gb/s)
  • SLC
  • -40 ~ + 100
Manufacturer part number
SDM5A
Manufacturer
Apacer
Interface
SATA 3.2 (6Gb/s)
NAND Flash Type
SLC

The Apacer SDM5A 22P90D is a SATA 3.2 SSD module with SLC flash from 1 to 32 GB, designed for embedded and industrial systems.

Product overview

Overview. The Apacer SDM5A 22P90D is an SSD module (SATA disk on module) in SSD Module form factor, featuring a SATA 3.2 (6 Gb/s) interface and a (7+15) pin male connector. It is offered in capacities from 1 GB to 32 GB.

Main characteristics. The NAND flash is of SLC type. Speeds reach up to 37 MB/s sequential read and up to 75 MB/s sequential write. The built-in controller provides a 40-bit per 1K bytes BCH ECC engine.

Temperature and environment. The standard operating temperature range is 0 to +70 °C, and the storage temperature range is -40 to +100 °C. The module withstands shocks of 50 G for 11 ms in operation and 1500 G for 0.5 ms in non-operation, as well as vibrations compliant with MIL-STD-810G.

Dimensions. The module measures 44.00 x 30.00 x 11.00 mm (L x W x H).

Typical uses. This module suits embedded and industrial computing systems exposed to significant mechanical and thermal stress.

See all specifications

Highlights

  • Form factor: SSD Module
  • Capacity: 1GB~32GB
  • Connector: (7+15) pin male
  • Dimension(L x W x H): 44.00 x 30.00 x 11.00 mm
  • ECC Engine: Built-in 40-bit per 1K bytes BCH ECC
  • Interface: SATA 3.2 (6Gb/s)

Good to know before integrating

  • Thermal: rated operating range 0 ~ + 70 — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All NVMe SSDs
Request a quote