Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

A10 – Digital Residual Chlorine Controller with 4-20 mA Output

Digital Residual Chlorine Controller with 4-20 mA Output

pH and Conductivity Analyzers

  • 4-20 mA current loop
Manufacturer part number
A10
Manufacturer
Apure

Digital online controller for residual chlorine measurement, used with a compatible chlorine probe. It provides display, calibration and a 4-20 mA output.

Product overview

Overview. The Apure A10 is an online residual chlorine controller used with a compatible chlorine probe. It receives the probe signal and provides the configured display, calibration and output functions.

Main characteristics. The measuring range is 0-20.00 mg/L for residual chlorine, 0-14 pH and 0-99 °C for temperature. Accuracy is ±1% FS, with stability of ±1% FS over 24 h. Automatic temperature compensation covers 0-99 °C, with a resolution of 0.1 °C.

Outputs and connections. The controller provides one 4-20 mA output. The cable length is 5 m. Confirm active or passive wiring, isolation and load before integration.

Power and environment. Power supply AC 220V ±10%, 50/60 Hz. Minimum operating temperature of 0 °C or higher, medium pressure from 0 to 0.5 MPa.

Dimensions and mounting. Dimensions 96*96*132 mm (H*W*D), panel cut-out 92X92 mm (H*W).

Integration. Confirm which chlorine species the supplied probe measures and the controller configuration. A chloride-ion electrode or an ORP reading is not a substitute for a chlorine-specific measurement. Available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote