CF-E311 – Embedded UHF RFID reader module with Impinj E310 chip

Embedded UHF RFID reader module with Impinj E310 chip

UHF RFID Readers

  • 600mA (27dbm)
  • 67mA
  • IPEX female
  • Data Communication
Manufacturer part number
CF-E311
Manufacturer
Chafon
Environmental Parameters
Development Environment
RFID Technical Parameters
Data Communication

The CF-E311 is an embedded UHF RFID reader module from Chafon, designed for integration into equipment and handheld devices. It reads up to 250 tags per second under ISO18000-6C (EPC GEN2).

Product overview

Overview. The Chafon CF-E311 is an embedded UHF RFID reader module based on the Impinj E310 chip. It is designed to be integrated into a host device rather than used as a standalone reader.

Main characteristics. The module reaches a maximum inventory speed of 250 tags per second and has a buffer of 1000 tags with 96-bit EPC. It supports multiple tag anti-collision and includes an RSSI indicator to identify tag signal distance. The read range is 0 to 10 meters, depending on the antenna and tag used. RF output power is adjustable from 0 to 27 dBm, and receive sensitivity is -74 dBm.

Interfaces and connectivity. Communication uses a TTL UART interface at 115200 bps on a 20-pin connector. The antenna connects through an IPEX female port. The module supports frequency hopping (FHSS) or fixed frequency transmission modes, as well as active and answer operating modes. The firmware can be upgraded online.

Power and environment. The module operates from a supply voltage of 3.6 to 5.5 V. Current consumption is 360 mA minimum in operation and 600 mA maximum (27 dBm), with a standby current of 67 mA. The operating temperature range is -20 °C to +60 °C and the storage range is -40 °C to +85 °C. Dimensions are 28 × 28 × 3.5 mm and weight is 4.5.

Frequency bands. The module covers 902 to 928 MHz (US) and 865 to 868 MHz (EU).

Development and integration. The development kit includes an SDK, an API, examples and a user manual. Development is possible in C#, Delphi, Java, Python, VB and other languages. The manufacturer recommends careful heat dissipation, with the module in full contact with the reader's base plate and the use of thermal grease.

Typical uses. This module is intended for integration into handheld terminals and equipment, as well as logistics and clothing management.

See all specifications

Highlights

  • Cooling method — External cooling — SDK: Demo software, API, examples, user manual
  • Environmental Parameters: Development Environment
  • Frequency — 902~928MHz (US)865~868MHz (EU) — Antenna port: IPEX female
  • Operating Humidity: Physical parameters
  • Operating temperature — -20℃~+60℃ — Development language: C#, Delphi, Java, Python, VB and other languages
  • Protocol — ISO18000-6C (EPC GEN2) — Communication interface: TTL Uart interface, baud rate 115200bps

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range C#, Delphi, Java, Python, VB and other languages — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All UHF RFID Readers
Request a quote