Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

CF-E511 – Impinj E510 embedded UHF RFID module, 700 tags/s

Impinj E510 embedded UHF RFID module, 700 tags/s

UHF RFID Readers

  • RFID and NFC
Manufacturer part number
CF-E511
Manufacturer
Chafon

The Chafon CF-E511 is an embedded UHF RFID reader module built around the Impinj E510 chip, designed for integration into third-party equipment.

Product overview

Overview. The Chafon CF-E511 is an embedded UHF RFID reader module based on the Impinj E510 chip, designed for integration into handheld devices and equipment. It reads tags according to the ISO18000-6C (EPC GEN2) protocol.

Reading performance. The module reaches a maximum inventory speed of 700 tags/s and has a buffer of 1000 tags @ 96-bit EPC. It supports multiple-tag anti-collision, and the RSSI function identifies the distance of tag signals. The read distance is 0 to 10 meters, depending on the antenna and tag used.

Radio frequency. The frequency is 902 to 928 MHz (US) and 865 to 868 MHz (EU). The RF output power is 0 to 27 dBm, adjustable, and receive sensitivity is -81 dBm. The antenna port is an IPEX female connector. The module operates in wide-spectrum frequency hopping (FHSS) or fixed-frequency transmission mode.

Interfaces and power. Communication is via a TTL UART interface at 115200 bps, through a 20-pin connector. The operating voltage is 3.6 to 5.5 V. Working current is 360 mA minimum and 600 mA maximum (27 dBm), with 67 mA standby current.

Environment and dimensions. The module operates from -20 to +60 °C and is stored from -40 to +85 °C. Its dimensions are 28 × 28 × 3.5 mm and it weighs 4.5 g. Online firmware upgrade is supported.

Development and integration. An SDK including demo software, API, examples and user manual is provided. Development is possible in C#, Delphi, Java, Python, VB and other languages. The manufacturer recommends good heat dissipation: the module should be in full contact with the reader's base plate, with thermal grease applied to the contact surface.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All UHF RFID Readers
Request a quote