CF500 – UHF RFID reader for access control with built-in antenna

UHF RFID reader for access control with built-in antenna

UHF RFID Readers

  • -40℃--+65℃
  • LED,BEEP,WG
  • USB-HID
  • IP50
Manufacturer part number
CF500
Manufacturer
Chafon
RFID Technical Parameters
Data Communication

The CF500 is a Chafon UHF RFID reader with a built-in circularly polarized antenna, intended for access control, process tracking and personnel attendance.

Product overview

Overview. The Chafon CF500 UHF RFID reader integrates a 1.5 dBi circularly polarized antenna and supports ISO18000-6C (EPC GEN2) tags. It is designed for access control, process tracking, personnel attendance and conference check-in.

Main characteristics. The reader reads more than 50 tags per second for a single tag, depending on the tag, antenna gain and transmit power. RF output power is adjustable from 5 to 26 dBm in 1 dB steps, with a power adjustment accuracy of ±0.5 dB. Receiver sensitivity is -79 dBm at 15 dBm transmit power and -77 dBm at 26 dBm. Read distance is 0 to 1 m depending on the tag and application environment. RSSI support allows the distance of a tag to be assessed.

Interfaces and connectivity. The reader communicates over USB-HID and provides a GPIO interface with LED, BEEP and WG (Wiegand) outputs. The Type-C connector supplies USB 5 V power and handles communication. The 1.25 x 6-pin WG terminal carries the Wiegand and GPIO signals.

Power and environment. Operating voltage is +5 V to +24 V. Module dimensions are 117 x 60 x 25.8 mm and heat dissipation is external. The product has an IP50 ingress protection rating and operates between -40 °C and +65 °C.

Typical uses. The LED, BEEP and WG outputs allow the reader to be connected to a door controller or an existing access control system.

See all specifications

Highlights

  • Antenna — 1.5dbi Circularly Polarized Antenna — Operating Voltage: +5V~+24V
  • Frequency — 902~928MHz (US)865.6~867.6MHz (EU) — Communication Interface: USB-HID
  • Module Dimensions — 117mm*60mm*25.8mm — Heat Dissipation: External heat dissipation
  • Physical Parameters — Ingress Protection (IP): IP50
  • Protocol — ISO18000-6C (EPC GEN2) — GPIO interface: LED,BEEP,WG
  • Read Rate — >50 tags/s (single tag); depends on tag, antenna gain, and transmit power: Operating Mode Power Consumption

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40℃--+65℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All UHF RFID Readers
Request a quote