The Chafon CF501 UHF RFID reader is a module with built-in antenna for reading EPC GEN2 UHF cards, intended notably for badge-based access control and personnel attendance.
Operating Temperature-40℃--+65℃
Communication interfaceUSB-HID
GPIO InterfaceLED, BEEP, Wiegand
Frequency865.6—867.6MHZ ( EU ) / 902-928MHZ (US)
Storage Temperature-45℃--+85℃
Module specifications and dimensions110mm*56mm*18mm
Product overview
Chafon CF501 is a UHF RFID reader module with built-in antenna, compliant with the ISO18000-6C (EPC GEN2) protocol and designed for reading and writing UHF badges. Overview — The CF501 combines a UHF reader and a 1.5 dBi circularly polarized antenna in a 110 mm × 56 mm × 18 mm housing, designed for single-card reading at a nominal distance of about 1 m, depending on the tag used.
Main characteristics. The reader operates in the 865.6—867.6 MHz (EU) or 902-928 MHz (US) band and offers an adjustable RF output power from 5 to 26 dBm in 1 dB steps, with a power adjustment accuracy of ± 0.5 dB. Module receiving sensitivity is -79 dBm at 15 dBm transmit power and -77 dBm at 26 dBm. The stated reading speed is more than 50 images per second for a single tag, and tag RSSI is supported.
Interfaces and connectivity. The CF501 communicates over USB-HID and provides a GPIO interface with LED, BEEP and Wiegand outputs, allowing connection to an access control controller or an attendance system.
Power and environment. Operating voltage from +5 V to +24 V. Operating temperature from -40 °C to +65 °C and storage temperature from -45 °C to +85 °C. Waterproof level IP56. Heat is dissipated through an external cooling method.
Typical uses. Access control by card swiping, personnel attendance, process tracking and meeting sign-in.
Integration. Logic levels are VIL -0.5 to 0.8 V and VIH +2 to 3.3 V. The transmitter spectrum complies with domestic radio management requirements, with adjacent channels at -30 dBc and separated channels at -60 dBc.
The Chafon CF501 UHF RFID reader is a module with built-in antenna for reading EPC GEN2 UHF cards, intended notably for badge-based access control and personnel attendance.
Operating Temperature-40℃--+65℃
Communication interfaceUSB-HID
GPIO InterfaceLED, BEEP, Wiegand
Frequency865.6—867.6MHZ ( EU ) / 902-928MHZ (US)
Storage Temperature-45℃--+85℃
2. Datasheet extract (recorded values)
Parameter
Value
Built-in antenna
1.5dbi circularly polarized antenna
Card reading speed
>50 images/second (single tag); depends on tag, antenna gain and transmit power
Communication interface
USB-HID
Frequency
865.6—867.6MHZ ( EU ) / 902-928MHZ (US)
GPIO Interface
LED, BEEP, Wiegand
Heat dissipation method
External cooling
Logic Level
VIL -0.5 –0.8V ; VIH +2 —3.3V
Model definition
CF501
Module specifications and dimensions
110mm*56mm*18mm
Operating Temperature
-40℃--+65℃
Operating Voltage
+5V~+24V
Pin — D efinition — Color
Illustrate
Protocol
ISO18000-6C(EPC GEN2)
RF output
Independent read and write mode 5-26dBm, step 1dB, power adjustment accuracy ± 0.5dB
Sensitivity
Module receiving sensitivity: -79dBm at 15dBm transmit power, -77dBm at 26dBm transmit power
Storage Temperature
-45℃--+85℃
Tag reading distance
Nominal 1m; dependent on tag selected
Tag RSSI
support
Transmitter spectrum
Comply with the requirements of domestic radio management regulations: adjacent channels -30dBc; separated channels -60dBc
Waterproof level
IP56
Integration
Points to check before using CF501 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Thermalrated operating range -40℃--+65℃ — check it against the installation environment.
Power and communication
Operating Voltage
+5V~+24V
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Thermal : rated operating range -40℃--+65℃ — check it against the installation environment.
Applications and use cases
Architectures in which CF501 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Counting stock by hand is slow and error-prone. UHF RFID tags on items, fixed and handheld readers, and label printers let inventory be read without line of sight
To check
Materials of the tagged items (metal and liquids need suitable tags)
Read distance and number of tags read at once
Regional UHF frequency band of the readers
Associated system blocks
ReadersAntennasTags and printing
Need a complete solution?
Send a request for CF501 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productChafon
CF501
UHF RFID reader with built-in antenna, USB-HID and Wiegand output
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details