CP-IO22-A4-2 – Digital and analog I/O expansion board for DIN rail

Digital and analog I/O expansion board for DIN rail

Modular DIN-Rail Remote I/O Modules

  • 3.3 ~ 28 VDC
  • 0 ~ 5 VDC
  • 12 ~ 24 VDC
  • 150 mA
Manufacturer part number
A02004
Manufacturer
Comfile Technology
Input voltage range
0 ~ 5 VDC
Voltage Range
12 ~ 24 VDC

Multifunction I/O expansion board from Comfile Technology for the ComfilePi system, combining digital inputs and outputs with analog input and output channels on a single board. Intended for on/off control and analog signal processing applications.

Product overview

Overview. The Comfile Technology CP-IO22-A4-2 is a multifunction I/O expansion board for the ComfilePi system, integrating digital inputs and outputs with analog input and output channels in one module, for applications that combine on/off control and precise analog signal processing. It mounts directly on the rear panel of the ComfilePi and provides screw terminals and indicator LEDs for wiring and status monitoring.

Digital inputs. 11 channels, voltage range 12 to 24 VDC, absolute min/max voltage range 3.3 to 28 VDC, response time 5 ms. Input OFF level below 1.8 VDC, input ON level above 2.5 VDC. Indicator LED OFF level below 4.5 V, indicator LED ON level above 5.0 V.

Digital outputs. 11 DC sink (NPN) outputs, maximum output voltage 30 VDC, response time 10 ms, maximum output current 150 mA.

Analog inputs and outputs. 4 analog inputs, input voltage range 0 to 5 VDC, resolution 187.5 µV/bit (−26,666 to 0 to 26,666), sample rate 1.62 ms. 2 analog outputs, output voltage 0 to 5 VDC, resolution 1.22 mV/bit (0 to 4094), sample rate 12 µs, maximum output current 20 mA.

Integration. Not compatible with the Cpi-C070WR-4C. Package includes a 40-pin ribbon cable and 4 mounting screws.

Typical uses. Connecting industrial sensors and actuators (solenoid valves, relays, 24 V signals) to the ComfilePi, where the GPIO pins of a standard Raspberry Pi, limited to 3.3 V logic, are not sufficient.

See all specifications

Highlights

  • Response time: 5 ms
  • Output voltage: 0 ~ 5 VDC
  • Absolute min/max voltage range: 3.3 ~ 28 VDC
  • Channels: 11
  • Indicator LED OFF level: < 4.5 V
  • Indicator LED ON level: > 5.0 V

Typical applications

Derived from the part category, not a compatibility statement.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote