K706 – Dual-frequency multi-constellation GNSS OEM board with 8 GB memory

Dual-frequency multi-constellation GNSS OEM board with 8 GB memory

GPS Modules

  • -40 °C to + 80 °C
  • +3.3 V~ +5.5 VDC
  • 1.68 W
  • 8 GB
Manufacturer part number
K706
Manufacturer
ComNav
Operating Temperature
-40 °C to + 80 °C
I/O interface
2 × 12 pin male connector

The ComNav K706 is a dual-frequency, multi-constellation GNSS OEM board designed to deliver high-precision positions, notably for unmanned systems. Available on quotation.

Product overview

ComNav K706 GNSS OEM Board. The ComNav K706 is a full-constellation, dual-frequency GNSS OEM board from ComNav that delivers reliable high-precision positions, especially for unmanned systems. According to the manufacturer, it is a replacement for the K803 card version with the same size (71 × 46 mm) and pin definition.

Tracked signals. The K706 tracks GPS L1 C/A, L2C, L2P, BeiDou B1, B2, GLONASS L1 C/A, L1P, L2 C/A, L2P, Galileo E1, E5b, QZSS and the SBAS systems WAAS, EGNOS, MSAS and GAGAN.

Accuracy. Single baseline RTK accuracy of 8 mm + 1 ppm horizontal and 15 mm + 1 ppm vertical, post-processing accuracy of 2.5 mm + 1 ppm horizontal and 5 mm + 1 ppm vertical, PPP accuracy of 10 cm horizontal and 20 cm vertical, velocity accuracy of 0.03 m/s and time accuracy of 20 ns. RTK initialization time below 10 s, initialization reliability above 99.9%.

Start-up and reacquisition. Cold start below 50 s, hot start below 15 s, warm start below 30 s, and signal reacquisition below 1.5 s.

Outputs and correction data. Position output in NMEA-0183 (GSV, RMC, HDT, VHD, GGA, GSA, ZDA, PTNL, PJK, PTNL AVR, PTNL GGK, NAVPOS), ComNav binary up to 20 Hz and BINEX, at 1, 2, 5, 10 or 20 Hz. Correction data input and output in RTCM 2.X, RTCM 3.X, CMR and CMR+ (GPS only).

Interfaces and connectivity. Two 12-pin male connectors, one 50 Ω female MCX antenna connector, LV-TTL ports with baud rates up to 921,600 bps, Ethernet, USB, CAN bus, PPS and event mark. 8 GB internal memory for recording static raw data or PPK data.

Power and environment. Input voltage from +3.3 V to +5.5 VDC, power consumption of 1.68 W, operating temperature from -40 °C to +80 °C, storage temperature from -55 °C to +95 °C, humidity of 95% non-condensing, acceleration of 4 g and overload of 15 g.

Dimensions and weight. 71 mm × 46 mm × 9 mm, 26.6 g.

Typical uses. The K706 suits integration into unmanned systems and other onboard equipment requiring precise GNSS positioning, thanks to its multiple interfaces and easy-to-integrate OEM board format.

See all specifications

Highlights

  • Acceleration: 4g
  • Antenna Connector: 1 × MCX female, 50 Ω
  • Cold start: < 50s
  • Correction data I/O: RTCM 2.X, 3.X, CMR (GPS only), CMR+ (GPS only)
  • DGPS: <0.4 m RMS
  • Hot Start: < 15s

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40 °C to + 80 °C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All GPS Modules
Request a quote