The ComNav K801T OEM GNSS module provides 5 ns timing accuracy with dual-frequency L1/L5 reception for timing applications, IoT, 5G mobile networks and robotics.
BeiDouB1I, B2a
GalileoE1, E5a
GLONASSG1
GPSL1C/A, L5
NavICL5
QZSSL1C/A, L5
Product overview
Overview. The ComNav K801T is a low-power OEM GNSS module designed for nanosecond-level timing applications, including 5G mobile networks, Internet of Things and robotics.
Main characteristics. The module delivers a timing accuracy of 5 ns in clear sky conditions, without relying on external GNSS correction services. It supports BDS-2, BDS-3, GPS, GLONASS, Galileo, QZSS and NavIC constellations and receives L1/L5 dual-frequency signals, which significantly reduces signal acquisition time after interruptions. Cold start time is below 24 s and signal reacquisition below 1 s.
Positioning performance. Stated performance is 1.5 m 3D RMS standalone, 1 m 3D RMS with SBAS and below 0.4 m RMS with DGPS, with velocity accuracy at or below 0.02 m/s. The module also offers single-baseline RTK and post-processing modes.
Interfaces and communication. Position data is output in ASCII NMEA-0183 (GGA, GSA, GSV, RMC, HDT, VHD, ZDA, VTG, GST, GLL messages) and in ComNav binary format. The module comes in an LGA 24-pin hardware interface.
Power and environment. The input voltage is +3.3 V ±5% DC, with a power consumption of 0.15 W when anti-interference is on. The external LNA antenna power is +3.3 V to +5 V ±5% VDC at 0-100 mA. The operating temperature range is -40 °C to +85 °C and the storage range is -40 °C to +95 °C.
Integration. The module measures 12 mm × 16 mm × 2.4 mm, weighs 1.6 g and uses a surface-mounted design for integration into electronic boards. Quotation requests for your application are welcome through Atlas Electronics.
The ComNav K801T OEM GNSS module provides 5 ns timing accuracy with dual-frequency L1/L5 reception for timing applications, IoT, 5G mobile networks and robotics.
Architectures in which K801T can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Surveying and ground monitoring need centimetre positions. RTK GNSS receivers used as base and rover, or RTK modules built into equipment, provide them
To check
Accuracy required and the correction source (own base or network)
Constellations and frequency bands tracked
Correction link between base and rover
Associated system blocks
Survey receiversRTK modules
Need a complete solution?
Send a request for K801T and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details