ComNav T30 IMU GNSS receiver. The ComNav T30 IMU GNSS receiver is a multi-constellation survey receiver with a built-in inertial measurement unit, intended for surveying and topographic work.
Signal tracking. The receiver tracks 1198 channels and supports GPS L1C/A, L1C, L2P, L2C and L5, BDS B1l, B2l, B3l, B1C, B2a and B2b, GLONASS G1, G2 and G3, Galileo E1, E5a, E5b, E6c and E5 AltBOC, QZSS L1C/A, L2C, L5 and L1C, IRNSS L5, and SBAS L1C/A.
Accuracy. Specified performance is 8 mm + 1 ppm RMS horizontal and 15 mm + 1 ppm RMS vertical in real-time kinematic (RTK), 2.5 mm + 0.5 ppm RMS horizontal and 5 mm + 0.5 ppm RMS vertical in static and fast static, 10 cm horizontal and 20 cm vertical in PPP, and 1.5 m 3D RMS standalone. RTK initialization time is below 10 s, with initialization reliability above 99.9%.
Built-in IMU. The calibration-free inertial unit supports tilt survey up to 120° within an accuracy of 2.5 cm.
Position output. ASCII NMEA-0183 outputs include GSV, RMC, HDT, VHD, GGA, GSA, ZDA, VTG and GST, plus the proprietary PTNL PJK, PTNL AVR and PTNL GGK messages. ComNav binary output can reach 20 Hz.
Communications. The 7-pin Lemo serial port supports baud rates up to 921,600 bps. The UHF modem transmits across 410 to 470 MHz with adjustable power of 0.5 W, 1 W or 2 W and a range of 3 to 15 km. The receiver also includes 802.11b/g/n WiFi at 2.4 GHz and a 4G modem.
Power and environment. Input voltage 7 to 28 VDC, power consumption 1.92 W, two 3400 mAh Li-ion batteries giving up to 24 hours typically, IP67 rating, and operating temperature from -40 °C to +65 °C.
Integration. The receiver is configured through the Survey Master software on Android, with a survey wizard. Available on quotation from Atlas Electronics.