T300 – Multi-constellation survey GNSS receiver

Multi-constellation survey GNSS receiver

Survey GNSS Receivers

  • GNSS
Manufacturer part number
T300
Manufacturer
ComNav

The ComNav T300 Plus is a 965-channel multi-constellation survey GNSS receiver with up to 120° tilt compensation, designed for centimetre-accuracy surveying.

Product overview

Overview. The ComNav T300 Plus is a survey GNSS receiver that tracks all working and planned GNSS constellations, with multi-frequency tracking for centimetre-accuracy measurements.

Main characteristics. The receiver tracks 965 channels, covering GPS, BDS, GLONASS, Galileo, QZSS, Navic and SBAS. The tilt sensor provides compensation up to 120°, allowing high-accuracy data to be collected faster in the field. The stated accuracy in real-time kinematic (RTK) is 8 mm + 1 ppm RMS horizontally and 15 mm + 1 ppm RMS vertically, with RTK initialisation under 10 s.

Interfaces and communications. The 7-pin Lemo serial port supports baud rates up to 921,600 bps. The UHF modem transmits across 410-470 MHz with adjustable power from 0.5 to 2 W, for a range of 1 to 5 km. The 802.11b/g/n WIFI module at 2.4 GHz and the 4G modem, supporting GSM, Point to Point/Points and NTRIP, provide additional link options.

Power and environment. The receiver runs on a 7 to 28 VDC input with a power consumption of 1.92 W. It carries two 2000 mAh Li-ion batteries (2 × 2000 mAh), for a typical runtime of 10 hours. It is rated IP67, operates from -40 °C to +65 °C, and survives a 2 m drop onto concrete.

Typical uses. With its ComNav ASCII and binary outputs and serial port, the T300 Plus integrates with survey controllers and field software for surveying and topographic work.

See all specifications

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Survey GNSS Receivers
Request a quote