Venus Laser RTK – Laser RTK-GNSS receiver with IMU, multi-constellation

Laser RTK-GNSS receiver with IMU, multi-constellation

Survey GNSS Receivers

  • 3Hz Maximum Value: 5Hz
  • 3Hz
  • G1, G2, G3
  • L5
Manufacturer part number
VENUS
Manufacturer
ComNav
BDS
B1l, B2l, B3l, B1C, B2a, B2b
Classic Value
3Hz

The ComNav Venus Laser RTK is a handheld GNSS receiver with an integrated laser distance meter and IMU for rodless surveying. It tracks GPS, BDS, GLONASS, Galileo, QZSS, IRNSS and SBAS.

Product overview

ComNav Venus Laser RTK. The RTK-GNSS receiver. The ComNav Venus Laser RTK is a handheld GNSS receiver that integrates a laser distance meter and an IMU inertial sensor for rodless surveying. The manufacturer presents it as a GNSS receiver integrating laser and IMU technologies.

Main characteristics. The receiver has 1590 channels and tracks GPS (L1C/A, L1C, L2P, L2C, L5), BDS (B1l, B2l, B3l, B1C, B2a, B2b), GLONASS (G1, G2, G3), Galileo (E1, E5a, E5b, E6c, E5 AltBOC), QZSS (L1C/A, L2C, L5, L1C), IRNSS (L5) and SBAS (L1C/A). The measuring frequency is 3 Hz classic and 5 Hz maximum. The data update rate is 1 Hz, 2 Hz, 5 Hz, 10 Hz or 20 Hz.

Accuracy. In RTK, accuracy is 8 mm + 1 ppm RMS horizontal and 15 mm + 1 ppm RMS vertical. In static and fast static, it is 2.5 mm + 0.5 ppm RMS horizontal and 5 mm + 0.5 ppm RMS vertical. RTK initialisation takes under 10 s for a baseline up to 10 km, with an initialisation reliability of at least 99.9%. Laser tilt measurement is 5.5 cm at most over a 2 m range, with tilt up to 120° in handheld mode.

Data output. ASCII NMEA-0183 sentences include GSV, RMC, HDT, GGA, GSA, ZDA, VTG and GST, together with PTNL, PJK and PTNL, GGK. The ComNav binary format is available up to 20 Hz.

Operating conditions. The plastic housing measures 80 ± 1 mm × 70 ± 1 mm × 150 ± 1 mm and weighs 380 g. It is rated IP67 for dust and water. Working temperature ranges from -20 °C to +60 °C, storage temperature from -30 °C to +70 °C. The range pole interface is an M8 thread.

Typical uses. The green laser, visible in daylight, measures points where a range pole cannot be set, suited to survey and setting-out work. The receiver fits into an RTK GNSS survey workflow and connects by NFC and Bluetooth.

See all specifications

Highlights

  • BDS: B1l, B2l, B3l, B1C, B2a, B2b
  • Classic Value: 3Hz
  • Galileo: E1, E5a, E5b, E6c, E5 AItBOC
  • GLONASS: G1, G2, G3
  • GPS: L1C/A, L1C, L2P, L2C, L5
  • IRNSS: L5

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Survey GNSS Receivers
Request a quote