Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

MX93 – IoT single board computer with NXP i.MX93 dual-core ARM Cortex-A55 and LTE modem

IoT single board computer with NXP i.MX93 dual-core ARM Cortex-A55 and LTE modem

ARM Single Board Computers

  • Arm architecture
Manufacturer part number
MX93
Manufacturer
CompuLab

The CompuLab MX93 is an IoT single board computer built on the dual-core ARM Cortex-A55 NXP i.MX93, intended for industrial control and monitoring with extensive wired and wireless connectivity.

Product overview

Overview. The CompuLab MX93 is an IoT single board computer (SBC) from CompuLab, equipped with an NXP i.MX9352 dual-core ARM Cortex-A55 processor clocked at 1.7 GHz, complemented by an ARM Cortex-M33 real-time co-processor at 250 MHz.

Main characteristics. LPDDR4 memory of 1 GB or 2 GB and soldered eMMC storage of 16 GB, 32 GB or 64 GB. Dimensions of 80 x 52 x 22 mm for a weight of 75 grams.

Interfaces and connectivity. One Gigabit Ethernet RJ45 port with PoE (powered device) support, up to two RS485 (2-wire) or CAN-FD ports on terminal block, three digital inputs/outputs compliant with 24 V EN 61131-2, one USB 2.0 host port with type-C connector and a SIM card socket. The cellular modem is available as 4G/LTE CAT-1 bis (SIMCOM SIM7672) or 4G/LTE CAT-4 (Telit LE910). Optional WiFi and Bluetooth module (IW611), and Bluetooth mesh, Thread and Zigbee mesh modules (Nordic nRF52840 or Silicon Labs MGM240P).

Power and environment. Power supply of 12 V to 24 V DC (-20%/+20%) with reverse voltage protection. Power consumption of 1 W to 5 W depending on system load and configuration. Operating temperature of 0 °C to 60 °C in commercial version, and -40 °C to 80 °C in industrial version (requires heat-plate). Storage temperature of -40 °C to 85 °C, relative humidity of 10% to 90% in operation.

Security and reliability. Secure boot implemented with the i.MX93 AHAB module, TPM 2.0 Infineon SLB9673, hardware watchdog, real-time clock with coin-cell battery, MTTF above 200,000 hours.

Typical uses. Supervision and control of PLCs through the RS485 and CAN-FD ports, data collection over wired or wireless networks, IoT gateway in industrial environments.

Integration. Serial console debugging via UART-to-USB and NXP SDP programming port on micro-USB. Debian Linux and Yocto Project images available, with support for Docker, Node-RED and OTA updates. Available on quotation from Atlas Electronics.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote