Product overview
Overview. The CUAV C-RTK 9Ps is a multi-constellation, multi-frequency RTK GNSS module built around a 184-channel u-blox ZED-F9P receiver, which simultaneously receives GPS, Galileo, GLONASS and BeiDou signals.
Positioning performance. RTK position accuracy is 0.01 m + 1 ppm CEP, with an RTK survey time under 60 seconds, a convergence time of about 14 seconds and an RTK navigation update rate of 20 Hz. Single-point GPS accuracy is 1.5 m CEP, and SBAS accuracy is 1.0 m CEP. Cold starts take under 24 seconds and hot starts under one second.
Heading and orientation. Two C-RTK 9Ps modules provide GPS heading with a reference accuracy of 0.4 degrees. This function can replace the IST8310 electronic compass in unmanned systems operating in complex electromagnetic environments, such as power line inspection.
Sensitivity and antenna. Sensitivity is −148 dBm for cold starts, −157 dBm for hot starts and −160 dBm for reacquisition. The antenna is an MMCX type with a gain of 2 dBi in rover mode and 5 dBi in base mode. The module includes active CW interference detection and removal and an onboard bandpass filter for anti-jamming.
Interfaces and protocols. The module communicates using NMEA, UBX binary and RTCM 3.x protocols. Base and rover role swapping is supported, both units running the same firmware and differing only in their configuration parameters.
Power and dimensions. The operating voltage ranges from 4.5 V to 6 V, and the operating temperature range is −40 °C to +85 °C. The module measures 47 mm × 32 mm × 12.2 mm and weighs 30 g.
Typical uses. The module suits RTK positioning of drones and unmanned systems, as a base station or a rover. It is compatible with ArduPilot and PX4 firmware.