Cudy FS1006P 2.0 Fast Ethernet PoE switch with 4 PoE 802.3at/af ports and 2 FE uplinks, for powering network equipment in desktop or wall-mount installations.
Ordering Information — Retail Package Dimension245×190×60 mm; 9.65×7.48×2.36 inches
Package ContentFS1006P; Power Cord; Installation Guide
Casing materialMetal
Cat. 3 or higher cable100 meters at 10 Mbps
Cat. 5 or higher cable100 meters at 100 Mbps
Cat. 5e or higher cable250 meters at 10 Mbps
Product overview
Overview. The Cudy FS1006P 2.0 is a 4-FE PoE switch from manufacturer Cudy, with 4 FE ports offering 802.3at/af PoE and 2 FE uplinks, powered by a 65 W supply.
Main characteristics. The switch uses Store-and-Forward forwarding, with a maximum switching capacity of 1.2 Gbps, a maximum forwarding rate of 0.8928 Mpps and a 448 Kbit packet buffer. Each PoE port can deliver up to 30 W, and the ports support Full Duplex, Half Duplex and Auto-Negotiation with Auto MDI/MDIX.
Interfaces and connectivity. The switch supports 802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3x Flow Control, 802.3af PoE and 802.3at PoE. Default, VLAN and Extend modes are selected with the VLAN/Default/Extend DIP switch. In Extend mode, ports #1 to #4 reach 250 meters at 10 Mbps over Cat. 5e or higher cable. Ports #1 to #4 are also available in VLAN mode.
Power and environment. Power input is 100-240V~ 50/60Hz, with a 1 W consumption excluding PoE. The operating temperature range is 0 to 40 °C, with an operating humidity of 10 to 90% non-condensing. The casing is metal and the switch can be installed on a desktop or wall-mounted.
Typical uses. This switch suits powering cameras, access points or other PoE devices compliant with 802.3af/at in a Fast Ethernet local network.
Integration. The product ships with the power supply, power cord and installation guide, and its MTBF is above 200,000 hours.
Cudy FS1006P 2.0 Fast Ethernet PoE switch with 4 PoE 802.3at/af ports and 2 FE uplinks, for powering network equipment in desktop or wall-mount installations.
Ordering Information — Retail Package Dimension245×190×60 mm; 9.65×7.48×2.36 inches
Package ContentFS1006P; Power Cord; Installation Guide
Casing materialMetal
Cat. 3 or higher cable100 meters at 10 Mbps
Cat. 5 or higher cable100 meters at 100 Mbps
2. Datasheet extract (recorded values)
Parameter
Value
Buttons and LEDs — LED
Power; Link/ACT of Each Ethernet Port; DIP Mode (SW)
Casing material
Metal
Cat. 3 or higher cable
100 meters at 10 Mbps
Cat. 5 or higher cable
100 meters at 100 Mbps
Cat. 5e or higher cable
250 meters at 10 Mbps
Copper Speed and Distance Note
250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.
Architectures in which 4-FE can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details