48_ND
Constant voltage LED driver 60 W, 120 to 277 VAC input

Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.
Constant voltage LED driver 60 W, 120 to 277 VAC input
Cupower constant voltage LED driver rated 60 W to power 48 V LED modules from a 120 to 277 VAC mains supply, with built-in active power factor correction.
Overview. The Cupower ID UCSVB 60/120277/48 ND is a compact 48 V, 60 W constant voltage LED driver designed to power LED modules over a mains input range of 120 to 277 VAC.
Main characteristics. The driver features an active PFC function, delivers an adjustable output current from 0 to 1,250 mA with a tolerance of ± 5 %, and offers a power factor of 0.95 with a THD of 20 % or less. Efficiency reaches 88 % at 120 VAC and 92 % at 277 VAC. The driver is flicker-free and provides an output current ripple of 2 %.
Power and environment. The operational input range is 108 to 305 VAC at 47 to 63 Hz, with a maximum input current of 0.6 A. Operating temperature ranges from -25 to +50 ℃, the maximum case temperature Tc is 90 ℃ and storage temperature ranges from -25 to +85 ℃. Permitted operating humidity is 10 to 90 %. Driver lifetime is 50,000 h at Tc 75 ℃ with a failure rate of 0.2 % per 1,000 h. Noise level is below 20 dB(A) at full load at 100 cm.
Safety. Withstand voltage is 1.8 kVAC input to output, 1.8 kVAC input to earth and 0.6 kVAC output to earth, with leakage below 5 mA for 60 s. The driver is protected against short circuit, overload and over temperature.
Typical uses. This driver suits powering 48 V LED strips and modules in lighting installations on a 120 to 277 VAC mains supply, within the limits specified by the manufacturer.
Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for 48_ND. For a missing document or a specific revision, our experts send it to you.
Cupower constant voltage LED driver rated 60 W to power 48 V LED modules from a 120 to 277 VAC mains supply, with built-in active power factor correction.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Constant voltage LED driver 60 W, 120 to 277 VAC input

LF-GMDxxxYM Dimmable LED Driver

LF-GITxxxYC 2-Wire In-track LED Driver

LF-FCA/FCCxxx Linear Non-isolated LED Driver

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | 48_ND |
| Manufacturer | Cupower |
LED Power Supplies
Non-isolated linear LED driver up to 720 W, 0-10 V/PWM/Rx dimming · Ref. : LF_FAAXXX_PB_LINEAR_NON_ISOLATED_LED_DRIVER
Price on request
LED Power Supplies
ZigBee controller for LED strips, dimming, CCT and RGBW · Ref. : 6A/12
Price on request
LED Power Supplies
96 W DALI dimmable LED power supply, 3 dimming timer modes · Ref. : EUD-096SXXXBVA
Price on request
LED Power Supplies
200 mm LED Traffic Light with Constant Current Driver
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details