Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

BMS-WIRING-TUTORIAL-2 – 3S 18650 BMS Wiring Tutorial

3S 18650 BMS Wiring Tutorial

BMS Boards

Manufacturer part number
BMS-WIRING-TUTORIAL-2
Manufacturer
Daly BMS

Daly BMS wiring tutorial for a 3S12P 18650 pack, describing the marking order of the 4-pin sampling lines and the voltage checks to perform before commissioning.

Product overview

Overview. This Daly BMS document explains how to wire a 3S BMS to a 3S12P battery pack built from 18650 cells, using 4-pin sampling cables. It is intended for installers assembling the protection board to the battery.

Line marking and soldering. The sampling lines are numbered B0 to B3, from the black cable to the last red cable, then matched to the welding points of the pack, with B0 as the total negative pole and B3 as the total positive pole. Soldering is done point by point, without inserting the protection board.

Voltage checks. The voltage between two adjacent lines must equal that of the matching section of the pack. The voltage difference of each string must not exceed 1 V. The document also advises measuring the internal resistance between B- and P- before connecting the board, with a conduction threshold of 10 Ω.

Available on quotation from Atlas Electronics.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All BMS Boards
Request a quote