PH_CONTROLLER
Industrial Online pH ORP Controller with 0/4-20 mA Output

- Measuring Range
- 0~14pH
- Power consumption
- 3W
- Dimension
- 100*100*120mm
- Display screen
- 3.2 inch LCD screen
Industrial Online pH ORP Controller with 0/4-20 mA Output
Daruifuno APX1-C1Z online pH and ORP controller with 0/4-20 mA current output, RS485 Modbus communication and two relays for dosing, cleaning or temperature control.
Overview. The APX1-C1Z industrial online pH ORP controller from Daruifuno measures pH from 0 to 14 and ORP from -2000 to 2000 mV, with a 3.2 inch LCD display and an enhanced ABS housing rated IP66.
Main characteristics. Accuracy of 0.1% of the measuring range or ± 0.02 pH and ± 2 mV for ORP, repeatability of 0.1% and stability of 0.05% of the measurement range every 24 hours. pH calibration in 3 points and ORP calibration in 2 points, with a quick calibration menu available without going to the main menu. Automatic (PT1000/NTC10K) or manual temperature compensation. Six-digit password setting, and setting data is permanently retained when powered off.
Interfaces and connectivity. 0/4-20 mA current output with an active current loop, load 1000 ohms, supporting long-term calibration. Two-wire RS485 digital interface supporting the Modbus protocol. Two SPST relays, maximum load 3 A / 250 VAC, which can be set for high and low alarms, temperature or wash control.
Power and environment. Power supply AC 100-240 V or DC 18-36 V, power consumption 3 W. Working temperature 0 to 60 °C, storage temperature -20 to 70 °C, relative humidity below 95% without condensation.
Integration. Panel mounting with a 92 x 92 mm cut-out, dimensions 100 x 100 x 120 mm, three M12 x 1.5 cable glands for cable diameters of 3 to 6.5 mm. System language English. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for PH_CONTROLLER, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Accuracy | 0.1% of the measuring range or pH: ± 0.02pH, ORP: ±2mV, take the larger one |
| Calibration method | pH: 3 points; ORP: 2 ponits, the calibration points can be set |
| Current output | A 0/4~20mA can be set with an active current loop, load 1000 ohm, and support long-term calibration |
| Digital Output | A two-wire RS485 interface, support Modbus protocol |
| Dimension | 100*100*120mm |
| Display screen | 3.2 inch LCD screen |
| Electrical Interface | 3 M12*1.5 gland heads, wire diameter 3~6.5mm |
| Installation Method | panel installation, hole size:92*92mm |
| Material | enhanced ABS |
| Measurements | pH, ORP |
| Measuring Range | 0~14pH |
| Option | AC 100~240V; DC 18~36V |
| Password | Six-digit passcode setting |
| Power consumption | 3W |
| Power Protection | The setting data is permanently retained, when the pH meter is powered off |
| Power supply | AC:100~240VAC, 50~60Hz;DC:+18~36VDC |
| Protection Grade | IP66 |
| Quick Calibration | A quick calibration menu is available without going to the main menu |
| Relay Output | 2 SPST relays,max. load 3A/250VAC, setting objects: high/low alarm, temperature or wash control |
| Repeatability | 0.1% better than measuring range |
| Resolution | pH: 0.01pH ORP: 1mV Temp.: 0.1℃ |
| Stability | 0.05% of the measurement range every 24 hours, no accumulation |
| Storage Temp | -20~70°C, relative humidity less than 95%RH (no condensation) |
| System language | English |
| Temp. compensation | automatic (PT1000/NTC10K) or manual |
| We will contact you immediately | Fill in more information so that we can get in touch with you faster |
| Work Temp. | 0~60°C, relative humidity less than 95%RH (no condensation) |
No specification matches.
Last verification : 2026-11-03
Official documents and the technical data recorded for PH_CONTROLLER. For a missing document or a specific revision, our experts send it to you.
Daruifuno APX1-C1Z online pH and ORP controller with 0/4-20 mA current output, RS485 Modbus communication and two relays for dosing, cleaning or temperature control.
| Parameter | Value |
|---|---|
| Accuracy | 0.1% of the measuring range or pH: ± 0.02pH, ORP: ±2mV, take the larger one |
| Calibration method | pH: 3 points; ORP: 2 ponits, the calibration points can be set |
| Current output | A 0/4~20mA can be set with an active current loop, load 1000 ohm, and support long-term calibration |
| Digital Output | A two-wire RS485 interface, support Modbus protocol |
| Dimension | 100*100*120mm |
| Display screen | 3.2 inch LCD screen |
| Electrical Interface | 3 M12*1.5 gland heads, wire diameter 3~6.5mm |
| Installation Method | panel installation, hole size:92*92mm |
| Material | enhanced ABS |
| Measurements | pH, ORP |
| Measuring Range | 0~14pH |
| Option | AC 100~240V; DC 18~36V |
| Password | Six-digit passcode setting |
| Power consumption | 3W |
| Power Protection | The setting data is permanently retained, when the pH meter is powered off |
| Power supply | AC:100~240VAC, 50~60Hz;DC:+18~36VDC |
| Protection Grade | IP66 |
| Quick Calibration | A quick calibration menu is available without going to the main menu |
| Relay Output | 2 SPST relays,max. load 3A/250VAC, setting objects: high/low alarm, temperature or wash control |
| Repeatability | 0.1% better than measuring range |
| Resolution | pH: 0.01pH ORP: 1mV Temp.: 0.1℃ |
| Stability | 0.05% of the measurement range every 24 hours, no accumulation |
| Storage Temp | -20~70°C, relative humidity less than 95%RH (no condensation) |
| System language | English |
| Temp. compensation | automatic (PT1000/NTC10K) or manual |
| We will contact you immediately | Fill in more information so that we can get in touch with you faster |
| Work Temp. | 0~60°C, relative humidity less than 95%RH (no condensation) |
Answers to the questions that the recorded characteristics of PH_CONTROLLER can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Digital Output": A two-wire RS485 interface, support Modbus protocol.
Yes — recorded under "Calibration method": pH: 3 points; ORP: 2 ponits, the calibration points can be set.
Yes — recorded under "Digital Output": A two-wire RS485 interface, support Modbus protocol.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Industrial Online pH ORP Controller with 0/4-20 mA Output

Series pH ORP Controller & Transmitter


Power Plant Water Ph Controller

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | PH_CONTROLLER |
| Manufacturer | Daruifuno |
pH Sensors
Industrial soil monitoring station with RS485 interface · Ref. : MAIGSRM
Price on request
pH Sensors
Industrial Online ORP Sensor with Platinum Bulb · Ref. : ORP8083-INDUSTRIAL-ORP-SENSOR
Price on request
pH Sensors
Chemical-Resistant UHF RFID Hard Tag for Metal Surfaces
Price on request
pH Sensors
Analog Composite Glass pH Electrode · Ref. : ASP200
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details