KC901K – Handheld Dual-Port Vector Network Analyzer

Handheld Dual-Port Vector Network Analyzer

Vector Network Analyzers

  • Typical: -130dBm/Hz
Manufacturer part number
KC901K
Manufacturer
Deepace
Internal attenuation range
Minimum: 0; Maximum: 60dB
Sweep points
Minimum: 101; Maximum: 10001

The Deepace KC901K is a handheld dual-port vector network analyzer covering 1kHz to 6GHz. It measures S-parameters and impedance of RF components and lines in the field.

Product overview

Overview. The Deepace KC901K handheld network analyzer is a dual-port vector network analyzer covering 1kHz to 6GHz with 1Hz frequency resolution. It measures S11, S12, S21 and S22 parameters and displays phase, return loss, VSWR, Smith chart and impedance results.

Main characteristics. Transmission dynamic range reaches 100dB in S21, with a typical directivity of 42dB at 4GHz and a receiver normalized noise floor of -130dBm/Hz. Trace noise is 0.005dB RMS in port-through configuration. The sweep can use 101 to 10001 points, at a typical 0.5ms per point at 30kHz. The RF source internal attenuation is adjustable from 0 to 60dB.

Built-in functions. The instrument integrates RF and audio frequency generators, a spectrum function with RBW adjustable from 1kHz to 30kHz, a field meter mode and a comparator for level and phase between two channels. The typical maximum output level is 0dBm, within a range of -6dBm to 6dBm.

Connectivity and power. The KC901K provides a Type-C port for data transfer and battery charging, a TF-card slot for data storage, an RJ-45 port for Ethernet connection and a 5.5×2.5 DC jack with wide range power input. Typical battery life is 3 hours depending on the function used. The operating temperature range is -40C to 55C, depending on the battery.

Dimensions and environment. The dimensions are 210×120×46mm (L×W×H) and the typical weight is 1.3kg, with a maximum of 1.5kg.

Typical uses. This analyzer suits characterization of antennas, filters and transmission lines, as well as VSWR and impedance measurement on site thanks to its portability. The free KCSDI software allows connection and data handling.

Calibration. Several calibration methods are supported, including response and enhanced response calibration, with cal-kit parameter input and calibrator female/male conversion.

See all specifications

Highlights

  • Receiver normalized noise floor: Typical: -130dBm/Hz

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Vector Network Analyzers
Request a quote