Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DFR0017 – 5A digital relay module for Arduino

5A digital relay module for Arduino

Relay Output Modules

Manufacturer part number
DFR0017
Manufacturer
DFRobot

Single-channel digital relay module controlled by a TTL signal to switch AC or DC loads up to 250VAC or 30VDC, notably from an Arduino board.

Product overview

Overview. The DFR0017 relay module from DFRobot, listed as Gravity: Digital 5A Relay Module for Arduino, is a single-channel digital relay for on/off switching of AC or DC power loads. It is driven by a standard digital signal and requires no external driver circuit.

Main characteristics. Switching current of 10A on the NO contact and 5A on the NC contact, with a maximum switching voltage of 150VAC or 24VDC per the datasheet and support for up to 250VAC or 30VDC. Operate time of 10ms and release time of 5ms at nominal voltage.

Interfaces and control. Digital control input at TTL level: 0 to 0.4V for OFF and 2.4 to 5V for ON. A status LED shows the relay state in real time. The module features a Gravity interface for quick integration.

Power and environment. UL ratings are 10A at 120VAC and 10A at 250VAC.

Typical uses. On/off switching of power loads in Arduino prototypes, automation and smart home equipment, driven directly from a digital output.

Integration. Compatible with 5V microcontroller systems. The manufacturer recommends a 3.3V-trigger compatible relay module for 3.3V systems. Suitable only for low-frequency on/off switching; not designed for analog power control or PWM. Inductive loads such as motors or solenoids may require additional protection.

Typical applications

Derived from the part category, not a compatibility statement.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Relay Output Modules
Request a quote