Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DFR0123 – 20W Adjustable DC-DC Boost Converter with Digital Display

20W Adjustable DC-DC Boost Converter with Digital Display

Non-Isolated DC/DC Converters

Manufacturer part number
DFR0123
Manufacturer
DFRobot

Adjustable 20W DC-DC boost module with digital display, 3-32V input and 5-35V output, for powering a load at a voltage higher than the source.

Product overview

Overview. The DFR0123 from DFRobot is an adjustable 20W DC-DC boost converter with digital display. It operates at a switching frequency of 400kHz and steps up an input voltage of 3 to 32V to an adjustable output voltage of 5 to 35V.

Main characteristics. Conversion efficiency reaches 94%, load regulation and voltage adjustment rate are both ±0.5%, and output ripple is 50mV. Input current can reach 4A peak. Rectification is non-synchronous.

Power and environment. The working temperature range is -40℃ to +85℃. Efficiency decreases as the voltage difference between input and output increases, and ripple increases with voltage and current. The digital display does not work below 5V input; the best working voltage range is 5 to 32V.

Typical uses. This module suits step-up from batteries, low-voltage sources or transformer outputs where an adjustable output voltage above the input is required, including custom power supplies and embedded electronic equipment.

Available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote