Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

W5100S – Arduino Ethernet shield with W5100S chip and microSD slot

Arduino Ethernet shield with W5100S chip and microSD slot

Educational STEM Coding & Sensor Starter Packs

  • Ethernet
Manufacturer part number
DFR0125
Manufacturer
DFRobot

W5100S Ethernet shield for Arduino boards, connecting the board to the Internet over an RJ45 cable for IoT projects.

Product overview

Overview. The DFRduino Ethernet Shield V3.0 DFR0125 from DFRobot is an Ethernet shield for Arduino boards, designed to connect the board to the Internet with an RJ45 cable. It plugs onto the board and runs Ethernet sample code to quickly build an IoT project.

Main characteristics. The shield is based on the WIZnet WS5100S Ethernet chip, which integrates fully hardwired TCP/IP protocol stacks and 4 independent hardware sockets operating simultaneously. Internal 16 KB TX/RX buffers handle TCP/IP packet processing. It supports auto-negotiation.

Interfaces and connectivity. The Arduino board communicates with the chip and the SD card over the SPI interface (ICSP pins). The shield supports both Arduino UNO and Mega series boards.

Power and environment. Operating voltage of 5 V, operating temperature from -40 ℃ to 85 ℃, dimensions 70 x 55 x 30 mm.

Typical uses. IoT projects requiring a stable wired Ethernet connection for an Arduino board.

Integration. Version V3.0 replaces the W5100 chip with the W5100S, which offers lower power consumption, lower heat and higher performance. Products are available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote