Dreamer Nano V4.1 – Compact ATmega32U4 Nano-format development board

Compact ATmega32U4 Nano-format development board

Microcontroller Development Boards

  • 6.5-12V
  • 50 mA
  • 40 mA
  • 16 MHz
Manufacturer part number
DFR0213
Manufacturer
DFRobot
Input Voltage (limits)
6.5-12V
DC current for 3.3V Pin
50 mA

Compact Nano-format development board built around the ATmega32U4 microcontroller with native Micro USB, intended for space-constrained prototypes and USB-HID projects.

Product overview

Dreamer Nano V4.1 from DFRobot. development board based on the ATmega32U4 microcontroller, Arduino Leonardo compatible, in Nano form factor.

Overview. Compact board built around a single ATmega32U4 microcontroller, reproducing the electrical capabilities of the Arduino Leonardo without the barrel power jack to reduce its footprint.

Main characteristics. ATmega32U4 microcontroller clocked at 16 MHz, 32 KB of Flash memory of which 4 KB is used by the bootloader, 2.5 KB of SRAM and 1 KB of EEPROM. The board provides 21 digital I/O pins, including 7 PWM channels, and 6 analog input channels. Size: 45 x 20 x 20 mm.

Interfaces and connectivity. Native Micro USB interface without a secondary USB-to-serial chip, enabling USB-HID device emulation such as keyboard, mouse or MIDI through firmware libraries. The I2C/TWI pins are located on digital pins D2 (SDA) and D3 (SCL).

Power and environment. Operating voltage of 5 V. Recommended input voltage of 6.5 to 12 V on VIN or 5 V via Micro USB, input limits of 6.5 to 12 V. Current of 40 mA per I/O pin and 50 mA on the 3.3 V pin.

Typical uses. Compact robotics controllers, custom USB-HID devices, interactive installations and portable data logging projects. Compatibility with Nano-format shields allows adding sensor or communication modules without redesigning the board.

Integration. Nano form factor suited to breadboards and compact PCB integration, with compatibility with the Arduino ecosystem and its libraries.

See all specifications

Highlights

  • Analog Input Channels: 6
  • Clock Speed: 16 MHz
  • DC current for 3.3V Pin: 50 mA
  • DC current per I/O Pin: 40 mA
  • Digital I/O pins: 21
  • EEPROM: 1 KB (ATmega32u4)

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote