DFR0216-2 – Arduino UNO R3 compatible development board with IO expansion shield

Arduino UNO R3 compatible development board with IO expansion shield

Educational STEM Coding & Sensor Starter Packs

  • 6 ~ 20V
  • 7 ~ 12V
  • 50 mA
  • 40 mA
Manufacturer part number
DFR0216-2
Manufacturer
DFRobot
Input Voltage (limits)
6 ~ 20V
Input Voltage (recommended)
7 ~ 12V

Development board compatible with Arduino UNO R3 and the Arduino IDE, based on the ATmega328 microcontroller, supplied with an IO expansion shield and a USB A-B cable. Intended for learning and development.

Product overview

Overview. The DFRduino UNO R3 from DFRobot is a small physical computing board, fully compatible with the Arduino UNO R3 board and the open-source Arduino IDE, which implements the Processing / Wiring language. It is supplied with the Gravity IO Expansion Shield for Arduino V7.1 and a USB A-B cable.

Main characteristics. ATmega328 microcontroller in DIP package, 16 MHz clock speed, 32 KB flash memory of which 2 KB is used by the bootloader, 2 KB SRAM and 1 KB EEPROM. The board operates at 5 V, with a DC current of 40 mA per I/O pin and 50 mA on the 3.3 V pin. Size: 75 x 54 x 15 mm.

Interfaces and connectivity. 14 digital I/O pins, of which 6 provide PWM output, and 6 analog input pins. The power section headers are red, analog I/O blue and digital I/O green, which simplifies sensor connection. An ATmega16U2 handles the USB-to-serial conversion.

Power and environment. Recommended input voltage 7 to 12 V, input voltage limits 6 to 20 V. RoHS compliant.

Typical uses. Programming education, prototyping and development of interactive systems connected to a computer or operating stand-alone.

Integration. The DIP microcontroller can be removed to reprogram it or to place it in a more compact project. The SDA and SCL pins and the IOREF pin allow shields to adapt to the board voltage.

See all specifications

Highlights

  • Analog input pins: 6
  • Clock Speed: 16 MHz
  • DC current for 3.3V Pin: 50 mA
  • DC current per I/O Pin: 40 mA
  • Digital I/O pins: 14 (of which 6 provide PWM output)
  • EEPROM: 1 KB (ATmega328)

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote