Romeo V2 – Robot control board with motor driver, Arduino compatible

Robot control board with motor driver, Arduino compatible

Microcontroller Development Boards

  • 2A
  • Arduino Leonardo
  • 5V(2A) / 3.3V DC
  • ATmega32u4
Manufacturer part number
DFR0225
Manufacturer
DFRobot
Bootloader
Arduino Leonardo
DC output
5V(2A) / 3.3V DC

Control board for robotics, compatible with Arduino Leonardo, with an integrated 2A continuous DC motor driver and an Xbee socket for wireless modules.

Product overview

DFRobot Romeo V2 is a robot control board based on the ATmega32u4 microcontroller, with an integrated motor driver and compatibility with Arduino.

Overview. The board is designed for robotics and embedded devices and is compatible with Arduino shields. It is programmed directly from the Arduino IDE 1.0.1 or later, and its bootloader is that of the Arduino Leonardo.

Main characteristics. ATmega32u4 microcontroller, motor driver with a continuous output current of 2A, integrated Xbee socket and support for stepper motor control. The ATmega32u4 handles USB directly and has two serial ports, which allows uploading sketches without removing the wireless module.

Interfaces and connectivity. Analog inputs A0 to A5 and A6 to A11 (on digital pins 4, 6, 8, 9, 10 and 12), PWM outputs on pins 3, 5, 6, 9, 10, 11 and 13 with 8-bit PWM output, three digital I/O extensions (D14 to D16), analog sensor extension port (orange for Signal, red for Vcc, black for GND) and a Micro USB connector.

Power and dimensions. Powered by USB or by an external 6V to 23V DC source, selectable by switch, with 5V (2A) and 3.3V DC outputs. Dimensions 89 x 84 x 14 mm.

Typical uses. Control of mobile robots and actuators, reading of analog sensors, wireless communication through Xbee modules.

Integration. The analog sensor port pin mapping differs from the previous version; select "Arduino Leonardo" in the Arduino IDE.

See all specifications

Highlights

  • Analog Inputs: A0-A5, A6 - A11 (on digital pins 4, 6, 8, 9, 10, and 12)
  • Analog sensor extension port: Orange for Signal, Red for Vcc, Black for GND
  • Bootloader: Arduino Leonardo
  • DC output: 5V(2A) / 3.3V DC
  • DC Supply: USB Powered or External 6V ~ 23V DC
  • Microcontroller: ATmega32u4

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote