DFR0316
MCP3424 18-Bit 4-Channel ADC with PGA for Raspberry Pi

- Operating Temperature
- -40°C ~ +125°C
- Output Interface
- I2C, PIN header of 2.54mm spacing
- Standy Current
- 300nA (5V)
- Programmable Data Rate
- 240, 60, 15, 3.75 SPS
MCP3424 18-Bit 4-Channel ADC with PGA for Raspberry Pi
Educational STEM Coding & Sensor Starter Packs
DFRobot DFR0316 Fermion module with an MCP3424 18-Bit ADC, 4 differential channels with PGA and I2C interface for Raspberry Pi and Arduino.
The DFRobot DFR0316 is an analog-to-digital converter module based on the MCP3424, a low noise 18-Bit delta-sigma converter from the MCP342X series. It adds analog inputs to a Raspberry Pi or Arduino over the I2C interface.
The module offers 4 differential channels, programmable resolution of 12, 14, 16 or 18bits, data rates of 240, 60, 15 or 3.75 SPS and a programmable gain amplifier (PGA). The differential full scale range is -2.048V / PGA to 2.048V / PGA, with an on-board 2.048V ± 0.05% reference. Gain error is 0.05% and offset error 15uV at PGA = 1, 18bits. One-shot and continuous conversion modes are available.
The module runs on 2.7 - 5.5V, draws 300nA in standby at 5V, measures 27x16mm and operates from -40°C to +125°C. It suits temperature sensing with RTD, thermistor or thermocouple, bridge sensing and weigh scales.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0316, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Differential Input Full Scale Range | -2.048V / PGA ~ 2.048V / PGA (e.g., PGA=4, Range is -0.512 ~ 0.512V) |
| Fermion | MCP3424 18-Bit ADC-4 Channel with Programmable Gain Amplifier for Raspberry Pi (Breakout) |
| Gain Error | 0.05% (PGA = 1, 18bits) |
| Input Interface | 4 differential channels, PIN header of 2.54mm spacing |
| Offset Error | 15uV (PGA = 1, 18bits) |
| On-Board Voltage Reference | 2.048V ± 0.05%, Drift 15 PPM /°C |
| Operating Temperature | -40°C ~ +125°C |
| Operating Voltage | 2.7 - 5.5V |
| Output Interface | I2C, PIN header of 2.54mm spacing |
| Programmable Data Rate | 240, 60, 15, 3.75 SPS |
| Programmable Resolution | 12, 14, 16, 18bits |
| Size | 27x16mm(1.06x0.63") |
| Standy Current | 300nA (5V) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0316. For a missing document or a specific revision, our experts send it to you.
DFRobot DFR0316 Fermion module with an MCP3424 18-Bit ADC, 4 differential channels with PGA and I2C interface for Raspberry Pi and Arduino.
| Parameter | Value |
|---|---|
| Differential Input Full Scale Range | -2.048V / PGA ~ 2.048V / PGA (e.g., PGA=4, Range is -0.512 ~ 0.512V) |
| Fermion | MCP3424 18-Bit ADC-4 Channel with Programmable Gain Amplifier for Raspberry Pi (Breakout) |
| Gain Error | 0.05% (PGA = 1, 18bits) |
| Input Interface | 4 differential channels, PIN header of 2.54mm spacing |
| Offset Error | 15uV (PGA = 1, 18bits) |
| On-Board Voltage Reference | 2.048V ± 0.05%, Drift 15 PPM /°C |
| Operating Temperature | -40°C ~ +125°C |
| Operating Voltage | 2.7 - 5.5V |
| Output Interface | I2C, PIN header of 2.54mm spacing |
| Programmable Data Rate | 240, 60, 15, 3.75 SPS |
| Programmable Resolution | 12, 14, 16, 18bits |
| Size | 27x16mm(1.06x0.63") |
| Standy Current | 300nA (5V) |
Points to check before using DFR0316 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| On-Board Voltage Reference | 2.048V ± 0.05%, Drift 15 PPM /°C |
| Operating Voltage | 2.7 - 5.5V |
| Standy Current | 300nA (5V) |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of DFR0316 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Output Interface": I2C, PIN header of 2.54mm spacing.
-40°C ~ +125°C (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
MCP3424 18-Bit 4-Channel ADC with PGA for Raspberry Pi

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0316 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details