DFRobot digital relay module from the Gravity range, switching up to 10A, for driving a load from a low-voltage microcontroller or single-board computer.
Max. Switching Current10A
Dimensions38 x 33 x 20 mm /1.5 x 1.3 x 0.81”
Electrical Life50 thousand uses
GravityDigital 10A Relay Module
Input SignalHigh Level (≥2.8V); Low Level (≤0.5V)
Max. Switching Power300W
Product overview
DFRobot digital relay module DFR0473. The Gravity: Digital 10A Relay Module from manufacturer DFRobot is a relay module designed to switch a load from a low-voltage microcontroller or single-board computer.
Main characteristics. The module operates from 2.8 V to 5.5 V, with a logic input at high level (≥2.8 V) and low level (≤0.5 V). It switches a maximum current of 10 A, a maximum voltage of 35 VAC or 30 VDC and a maximum power of 300 W. Rating loads are 10 A at 35 VAC and 10 A at 28 VDC.
Life and response times. The mechanical life is 1 million uses and the electrical life is 50 thousand uses. The operate time is 10 ms or less and the release time is 5 ms or less.
Connectivity. The module uses a 3-pin Gravity interface requiring no soldering, for plug and play use. An on-board LED shows the relay state. The module is compatible with 5 V Arduino boards as well as Raspberry Pi, BeagleBone Black, mbed, Intel Joule and Arduino 101 running at 3.3 V. The underside of the board is isolated by an acrylic plate.
Dimensions and weight. The module measures 38 x 33 x 20 mm and weighs 20 g.
Integration. The contacts are normally open (NO) and normally closed (NC). The module is supplied with its acrylic base and a Gravity digital sensor cable. It is available on quotation from Atlas Electronics.
DFRobot digital relay module from the Gravity range, switching up to 10A, for driving a load from a low-voltage microcontroller or single-board computer.
Max. Switching Current10A
Dimensions38 x 33 x 20 mm /1.5 x 1.3 x 0.81”
Electrical Life50 thousand uses
GravityDigital 10A Relay Module
Input SignalHigh Level (≥2.8V); Low Level (≤0.5V)
2. Datasheet extract (recorded values)
Parameter
Value
Dimensions
38 x 33 x 20 mm /1.5 x 1.3 x 0.81”
Electrical Life
50 thousand uses
Gravity
Digital 10A Relay Module
Input Signal
High Level (≥2.8V); Low Level (≤0.5V)
Max. Switching Current
10A
Max. Switching Power
300W
Max. Switching Voltage
35VAC; 30VDC
Mechanical Life
1 million uses
Operate Time
≤10ms
Operating Voltage
2.8V ~ 5.5V
Rating Load
10A@35VAC; 10A@28VDC
Release Time
≤5ms
Weight
20g
Applications and use cases
Architectures in which DFR0473 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A proprietary PLC locks the project into one vendor’s tools. Industrial controllers built on the Raspberry Pi Compute Module run Linux, Node-RED, Python or CODESYS on DIN rail, with I/O modules, an operator panel and a cellular router for remote access
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productDFRobot
DFR0473
Digital 10A relay module for Arduino and Raspberry Pi
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details