DFR0483
Gravity I/O expansion shield for FireBeetle boards

- Interface
- Gravity standard interface
- Input Voltage
- 3.7V~5.5V (VCC)
- Support maximum discharge current
- 600mA(Output voltage: LDO-3.3V )
- Supports low-power consumption Mode
- POWER_EN = LOW
Gravity I/O expansion shield for FireBeetle boards
Educational STEM Coding & Sensor Starter Packs
DFRobot DFR0483 shield that adapts Gravity sensors and modules to FireBeetle IoT boards, with 10 digital I/O, 5 analog inputs and independent power pins for each sensor.
DFRobot DFR0483, Gravity I/O expansion shield for FireBeetle boards — this product is an adapter that lets you connect Gravity sensors and modules easily to a FireBeetle board, the range being designed for low-power IoT nodes.
Main characteristics. the shield provides 10 digital I/O pins and 5 analog input pins. Each sensor has its own power pins. Its dimensions are 29.00 × 58.00 mm (1.14 × 2.28 inches).
Interfaces and connectivity. the interface is the Gravity standard interface, with support for one I2C bus, one UART and one SPI. The Gravity I2C OLED-2864 display is among the compatible modules used in the manufacturer's application examples.
Power and environment. the input voltage is 3.7 V to 5.5 V (VCC) and the output is 3.3 V. The maximum discharge current is 600 mA on the LDO-3.3V output. Low-power mode is enabled with POWER_EN = LOW. Note: the working voltage is 3.3 V only, the red pins being reserved for this voltage.
Typical uses. this shield is used to build compact IoT nodes, for example an instrument showing measurements on an OLED display, or a smart plugboard controlled over Bluetooth Low Energy, as described in the manufacturer's projects.
Integration. the kit includes the shield and two sets of 2.54 mm pitch 18-pin headers (short and long), ready to be soldered for installation on the FireBeetle board.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0483, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Output voltage | 3.3V |
| Analog input pins | 5 |
| Digital I/O pins | 10 |
| Dimension | 29.00×58.00mm/1.14 x 2.28ches |
| Gravity | I2C OLED-2864 Display × 1 |
| Input Voltage | 3.7V~5.5V (VCC) |
| Interface | Gravity standard interface |
| Support maximum discharge current | 600mA(Output voltage: LDO-3.3V ) |
| Supports low-power consumption Mode | POWER_EN = LOW |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0483. For a missing document or a specific revision, our experts send it to you.
DFRobot DFR0483 shield that adapts Gravity sensors and modules to FireBeetle IoT boards, with 10 digital I/O, 5 analog inputs and independent power pins for each sensor.
| Parameter | Value |
|---|---|
| Output voltage | 3.3V |
| Analog input pins | 5 |
| Digital I/O pins | 10 |
| Dimension | 29.00×58.00mm/1.14 x 2.28ches |
| Gravity | I2C OLED-2864 Display × 1 |
| Input Voltage | 3.7V~5.5V (VCC) |
| Interface | Gravity standard interface |
| Support maximum discharge current | 600mA(Output voltage: LDO-3.3V ) |
| Supports low-power consumption Mode | POWER_EN = LOW |
Answers to the questions that the recorded characteristics of DFR0483 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": I2C OLED-2864 Display × 1.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Gravity I/O expansion shield for FireBeetle boards

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0483 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details