Low-power Arduino microcontroller board with Bluetooth BLE 4.1 and ATmega328P processor, designed for IoT and wearable applications.
Analog Interfaces6
Digital Interfaces14
Operating Current3.3V
Support maximum charge current400Ma
Support maximum discharge current600mA (LDO-3.3V OUTPUT)
Dimension58 * 29 mm/ 2.28 * 1.14 inches
Product overview
Overview. The DFRobot DFR0492, FireBeetle 328P Low-Power Arduino Board, is a low-power microcontroller board built around an ATmega328P processor and a DIALOG BLE 4.1 Bluetooth chip. It operates at 3.3 V (8 MHz) and is compatible with the Arduino Pro or Pro Mini bootloader.
Main characteristics. The board supports BLE central and peripheral modes, cascade of up to 4 devices, peer-to-peer (P2P) wireless programming and Bluetooth firmware update. It is programmed with the Arduino IDE and provides 14 digital I/O, 6 analog inputs, one SPI, one I2C and one UART interface.
Power consumption and battery. Consumption is 25 µA in POWER DOWN mode and 70 µA with interrupts enabled. Two interrupts allow the BLE 4.1 chip and the ATmega328P to wake each other. An onboard lithium charging circuit supports up to 400 mA, and the 3.3 V LDO output delivers up to 600 mA.
Power supply and connections. The board is powered by a 3.7 V lithium battery or by 3.7 V to 5.5 V on VCC. Dimensions are 58 × 29 mm, with 2.54 mm pin or female header interfaces, solder-free in default configuration. Status LEDs are fitted and the built-in LED is on D13.
Typical uses. This board suits IoT and wearable or smart-tool applications requiring low-power Bluetooth communication, as well as prototyping with the Arduino environment.
Low-power Arduino microcontroller board with Bluetooth BLE 4.1 and ATmega328P processor, designed for IoT and wearable applications.
Analog Interfaces6
Digital Interfaces14
Operating Current3.3V
Support maximum charge current400Ma
Support maximum discharge current600mA (LDO-3.3V OUTPUT)
2. Datasheet extract (recorded values)
Parameter
Value
Analog Interfaces
6
Bootloader
Arduino Pro or Pro Mini, ATmega328 (3.3V, 8MHz)
Digital Interfaces
14
Dimension
58 * 29 mm/ 2.28 * 1.14 inches
I2C
1
Interface Mode
2.54mm (Pin/Female header), soldering free in default
LED_BUILTIN
D13
Lithium Battery Voltage
3.7V
Operating Current
3.3V
Processor
ATMEGA328P
SPI
1
Support low power consumption
25uA (POWER DOWN); 70uA (enabled interruption)
Support maximum charge current
400Ma
Support maximum discharge current
600mA (LDO-3.3V OUTPUT)
UART
1
VCC I/O Voltage
3.7V~5.5V
Applications and use cases
Architectures in which DFR0492 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for DFR0492 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productDFRobot
DFR0492
Low-power Arduino board ATmega328P with Bluetooth BLE 4.1
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details