DFR0513 – Dual-channel 3A DC motor driver with PPM signal input

Dual-channel 3A DC motor driver with PPM signal input

Educational STEM Coding & Sensor Starter Packs

  • 7~12V
  • 90mm×30mm
  • TLE5205
  • STM8S105
Manufacturer part number
DFR0513
Manufacturer
DFRobot
Input Voltage
7~12V
Dimension
90mm×30mm

DFRobot DFR0513 dual-channel DC motor driver that converts RC receiver PPM signals into speed and direction control for two motors, for model vehicles and robots.

Product overview

Overview. The DFRobot DFR0513 PPM 2x3A DC Motor Driver is a DC motor control board designed for aeromodelling platforms and remote-control robotic systems. It converts standard PPM signals from an RC receiver into precise speed and direction control for two DC motors.

Signal control. The board interprets standard 50 Hz PPM servo signals with a 5 to 10 % duty cycle. A centred stick places the motor in a stop state, and deflection in either direction increases speed in that direction. Channels CH1 and CH2 control outputs M1 and M2 respectively, with independent bidirectional drive.

Main characteristics. The TLE5205 driver architecture provides two independent motor outputs, each supporting 3 A continuous current with 6 A peak. Overcurrent protection safeguards the driver circuitry when load current exceeds safe limits.

Power and environment. The board operates from a recommended 7 to 12 V supply. An onboard regulator provides a 5 V output of up to 200 mA, allowing direct powering of the receiver. The module is compatible with 3.3 V controllers. Dimensions 90 × 30 mm, weight 35 g.

Typical uses. Differential-drive robots, tracked vehicles and model propulsion systems requiring precise steering control.

Integration. The board connects directly to an RC receiver, without any additional signal converter. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Dimension: 90mm×30mm
  • Driver Chip: TLE5205
  • Input Voltage: 7~12V
  • Logic Power: 5V (compatible with 3.3V controller)
  • Master Chip: STM8S105
  • Weight: 35 g

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote