Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DFR0568 – Automatic Step Up-Down DC-DC Power Module 3.3V

Automatic Step Up-Down DC-DC Power Module 3.3V

Non-Isolated DC/DC Converters

Manufacturer part number
DFR0568
Manufacturer
DFRobot

The DFR0568 is a DC-DC power module with a fixed 3.3V output and 600mA maximum current, which automatically steps a 2.5 to 15 Vdc input voltage up or down.

Product overview

Overview. The DFR0568 from DFRobot is a non-isolated automatic buck-boost DC-DC converter providing a fixed 3.3V output from a 2.5 to 15 Vdc input. Its compact 17 × 13 mm footprint suits embedding on a printed circuit board.

Main characteristics. Maximum output peak current of 600mA, output accuracy of ±0.1V, full-load output ripple below 50 mVpp and no-load current of 150 uA. The operating frequency can reach 1.2 MHz in theory.

Power and environment. Operating temperature from -40 °C to +85 °C, operating humidity from 20% to 90% relative humidity without condensation, storage temperature from -10 °C to +50 °C and service life of 50,000 h. The switch-off function is not supported. The input voltage must not exceed 15V, and a sustained load of 600mA or above shortens the module's service life.

Typical uses. Power supply for controller main-board, DIY current source, floodlight, DIY toy car, communication device and digital radio, as well as DIY mobile power banks.

Integration. Chip-mounting installation, without isolation. The module is available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote