Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DFR0571 – DC-DC buck-mode power module 8-28 V to 5 V 1.6 A

DC-DC buck-mode power module 8-28 V to 5 V 1.6 A

Non-Isolated DC/DC Converters

Manufacturer part number
DFR0571
Manufacturer
DFRobot

Non-isolated DC-DC buck-mode module delivering a fixed 5 V output from an 8 to 28 V input, for powering control boards and embedded projects.

Product overview

Overview. The DFR0571 from DFRobot is a buck-mode DC-DC power module in the non-isolated DC/DC converters category, delivering a fixed 5 V output from an 8 to 28 Vdc input.

Main characteristics. The module provides an output current of 1.6 A, with a maximum peak output current of 3 A and a full-load output ripple below 50 mVpp. Output voltage accuracy is ±0.1 V and the operating frequency can reach 0.5 MHz. No-load current is 0.5 mA.

Installation and dimensions. The module measures 16.5 × 22 mm (0.65 × 0.87 inch) and can be installed by chip-mounting or by 2.54 mm pin plug-in.

Power and environment. The module operates between -20 °C and +85 °C at 20% to 90% relative humidity, without condensation, and is stored between -10 °C and +50 °C. Its stated service life is 50000 h.

Typical uses. It suits powering controller main boards, DIY current sources, floodlights, DIY toy cars, communication devices and digital radios, as well as building mobile power supplies from high-capacity, high-voltage batteries.

Integration. The switch-off function is not supported. Load current should not stay at 3 A or above for long periods to protect the module's service life, and the minimum input voltage should be increased when the load current is high.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote