Product overview
Overview. The DFRobot FireBeetle 2 ESP32-E (reference DFR0654) is an IoT development board based on the ESP32-WROOM-32E module. It combines a 32-bit Xtensa dual-core LX6 processor clocked at 240 MHz with 2.4 GHz Wi-Fi and Bluetooth 4.2 BR/EDR + BLE, for connected sensor, control and display projects.
Main characteristics. The board provides 4 MB of Flash memory (32 Mbit), 448 KB of ROM and 520 KB of SRAM. It includes 18 digital pins, 11 analog pins, 2 DAC interfaces, 7 touch interfaces, 16 LED PWM channels and a WS2812 RGB LED. The module measures 25.4 mm × 60 mm and weighs 23 g.
Interfaces and connectivity. The board has 2 UART interfaces, 1 I2C interface, 1 SPI interface, 1 I2S interface and a GDI display interface for compatible DFRobot displays. The mounting holes have a diameter of 2.0 mm, and the castellated edge pads allow integration into a custom PCB.
Power and environment. The board is powered from a USB-C port at 5 V DC or from the VCC pin at 5 V DC. An onboard charging circuit and a PH2.0 connector accept a 3.7 to 4.2 V Li-ion battery, which supports battery-powered prototypes. Current consumption depends on the power source, the firmware and the connected peripherals.
Typical uses. This board suits the development of IoT prototypes, connected sensor nodes and battery-powered devices. A documented Arduino example covers deep sleep and wake-up configuration. Programming is possible with Arduino or MicroPython.
Integration. The FireBeetle 2 ESP32-E is neither pin-compatible nor mechanically compatible with the original FireBeetle series, and their expansion boards are not interchangeable. Check the pinout, board dimensions and peripheral requirements before replacing a board in an existing design.