Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

OpenMV Cam H7 Plus – Compact Python-programmable machine vision microcontroller board

Compact Python-programmable machine vision microcontroller board

GigE & USB3 Machine Vision Industrial Cameras

Manufacturer part number
DFR0833
Manufacturer
DFRobot

The OpenMV Cam H7 Plus from DFRobot is a small, low power microcontroller board for machine vision applications, programmable in Python.

Product overview

Overview. The OpenMV Cam H7 Plus from DFRobot (reference DFR0833) is a small, low power machine vision microcontroller board that you program in high level Python scripts through the MicroPython operating system, instead of C or C++.

Main characteristics. The board uses an STM32H743II ARM Cortex M7 processor running at 480 MHz, with 32 MB of SDRAM, 1 MB of SRAM, 32 MB of external flash and 2 MB of internal flash. Its Core Mark score is 2400. It includes an RGB LED and two high power 850nm IR LEDs.

Interfaces and connectivity. The board provides a full speed USB interface (12 Mb/s), an SPI bus up to 80 Mb/s, a microSD card socket, a 12-bit ADC and a 12-bit DAC. The RPC interface library works over UART up to 7.5 Mb/s, I2C up to 1 Mb/s, SPI up to 80 Mb/s, CAN bus up to 1 Mb/s, USB virtual COM port up to 12 Mb/s and WiFi up to 12 Mb/s. All I/O pins output 3.3V and are 5V tolerant, with interrupts and PWM on all 10 I/O pins and two pins for servo control.

Integration. OpenMV provides a generic Python interface library for USB and WiFi communications and an Arduino interface library for I2C, SPI, CAN and UART communications. The board connects to a computer, a Raspberry Pi or Beaglebone, or a microcontroller such as an Arduino or ESP8266/32. Available on quotation from Atlas Electronics.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote