Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DFR0835 – 4.7" E-ink display with ESP32-S3 controller and 16 grayscale levels

4.7" E-ink display with ESP32-S3 controller and 16 grayscale levels

Display Modules

Manufacturer part number
DFR0835
Manufacturer
DFRobot

4.7-inch 540x960 E-ink display module with an integrated ESP32-S3 controller and 16 grayscale levels, designed for IoT projects, desktop weather stations and electronic shelf labels.

Product overview

Overview. The DFR0835 from DFRobot is a 4.7-inch E-ink display with an ESP32-S3-WROOM-1-N16R18 controller, offering 540(H)×960(V) resolution and 16 grayscale levels. It is an electronic-ink display module with its own integrated microcontroller.

Main characteristics. The controller provides 16MB of Flash and 8MB of PSRAM. The display supports partial refresh, and the board carries two customizable buttons plus a reset button.

Interfaces and connectivity. The board features a PH 2.0 battery connector with an HX6610S charge and discharge protection chip, a 6-pin interface intended for a touchscreen panel (not included), and a 40-pin header compatible with the Raspberry Pi BUS interface.

Power and environment. Power is supplied by a 3.7V battery connected to the PH 2.0 connector, and a power cable is included. According to the manufacturer, an E-ink display provides a better reading experience than a regular LCD, low power consumption and image retention when powered off.

Typical uses. This module suits desktop weather stations, STEM education projects, IoT equipment, shelf labels and message boards.

Integration. The module is supported by a product wiki dedicated to ESP32 and ESP8266 projects.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Display Modules
Request a quote