DFR0850
Ethernet and PoE Shield for Arduino with W5500 Controller

- SPI Clock
- 80MHz (Max)
- Overall size
- 72.5mmx53.3mm / 2.85 x 2.1 inch
- PCB Size
- 68.6mmx53.3mm / 2.68 x 2.1 inch
- PHY
- WIZnet W5500
Ethernet and PoE Shield for Arduino with W5500 Controller
Educational STEM Coding & Sensor Starter Packs
Ethernet expansion shield for Arduino, built around a W5500 hardware TCP/IP controller and powered through IEEE 802.3at Power over Ethernet. It provides wired network connectivity for IoT gateways and embedded controllers.
Overview. The DFR0850 from DFRobot is an Ethernet and PoE shield for Arduino boards. It integrates a WIZnet W5500 Ethernet controller and handles both network communication and power over a single Ethernet cable.
Hardware TCP/IP stack. The W5500 controller implements TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE in hardware, relieving the microcontroller of network processing. The SPI clock can reach 80 MHz (maximum).
Power over Ethernet. The shield is a Class 0 PD device compliant with the IEEE 802.3at standard, powered from 48 V AC/DC. PoE power reaches up to 12 W, and the VIN port can output 12 V/1 A.
Connectivity. The shield provides a MicroSD slot and several Gravity connectors, including two 4-pin I2C ports, one UART interface, four 3-pin digital ports and four analog inputs.
Typical uses. IoT gateways, industrial controllers and remote monitoring systems, where a single Ethernet cable connects the node to the network and powers it.
Dimensions. 72.5 mm × 53.3 mm overall, PCB 68.6 mm × 53.3 mm, in the standard Arduino shield form factor.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0850, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Overall size | 72.5mmx53.3mm / 2.85 x 2.1 inch |
| PCB Size | 68.6mmx53.3mm / 2.68 x 2.1 inch |
| PHY | WIZnet W5500 |
| PoE Input | 48V AC/DC (the product is a Class 0 PD device that meets the 802.3at standard) |
| PoE Power | up to 12W (the VIN port can output 12V/1A) |
| SPI Clock | 80MHz (Max) |
| Support hardware TCP/IP protocol | TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0850. For a missing document or a specific revision, our experts send it to you.
Ethernet expansion shield for Arduino, built around a W5500 hardware TCP/IP controller and powered through IEEE 802.3at Power over Ethernet. It provides wired network connectivity for IoT gateways and embedded controllers.
| Parameter | Value |
|---|---|
| Overall size | 72.5mmx53.3mm / 2.85 x 2.1 inch |
| PCB Size | 68.6mmx53.3mm / 2.68 x 2.1 inch |
| PHY | WIZnet W5500 |
| PoE Input | 48V AC/DC (the product is a Class 0 PD device that meets the 802.3at standard) |
| PoE Power | up to 12W (the VIN port can output 12V/1A) |
| SPI Clock | 80MHz (Max) |
| Support hardware TCP/IP protocol | TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE |
Answers to the questions that the recorded characteristics of DFR0850 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "PoE Power": up to 12W (the VIN port can output 12V/1A).
Yes — recorded under "SPI Clock": 80MHz (Max).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Ethernet and PoE Shield for Arduino with W5500 Controller

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

USB3.0 HUB Extender Compatible with Ros Robot/Car Raspberry Pi Jetson Series Boards

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0850 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details