Product overview
Overview. The DFRobot M-DUINO 21 I/Os PLUS, reference DFR0904, is an Arduino-compatible industrial programmable logic controller (PLC) with optoisolated outputs, intended for professional automation projects.
Inputs and outputs. The controller provides 21 I/Os: analog inputs 0 to 10 Vac, digital inputs 7 to 24 Vdc and isolated digital inputs 5 to 24 Vdc, interrupt inputs 7 to 24 Vdc, and 8-bit analog outputs 0 to 10 Vac.
Communication. I2C, Ethernet, USB, RS485, RS232 and SPI interfaces are available, along with two Arduino Rx and Tx pins based on the Max232, Max485 and W5500 chips. Remote programming and monitoring are possible over Ethernet.
Expansion. The I2C bus supports up to 127 elements, and the serial port and RS485 allow system expansion.
Memory and processing. The microcontroller runs at 16 MHz, with 256 kB of Flash memory (8 kB used by the bootloader), 8 KB of SRAM and 4 KB of EEPROM.
Power and environment. The input power supply is 12 to 24 Vdc, with 2.5 A fuse protection and polarity protection. The rated power is 30 W and the maximum current 1.5 A. The operating voltage range is 11.4 to 25.4 Vdc. It operates between 0 and 60 °C at 10% to 90% humidity without condensation, in a non-corrosive atmosphere. Storage temperature is -20 to 60 °C. Dimensions: 101 x 701 x 119.5 mm.
Typical uses. RS485 and Modbus support allow connection to PLCs and supervisory systems, and the inputs and outputs control sensors and actuators.