DFRobot FireBeetle 2 ESP32-C6 IoT development board with a 160 MHz RISC-V processor, designed for low-power smart home automation, control and monitoring projects, with Wi-Fi, Bluetooth and 4 MB flash.
Operating Temperature-10~60℃
Type-C Input Voltage5V DC
VCC Input Voltage5V DC or 5V Solar Panel
Max Charging Current0.5A
Frequency band2.4GHz
Bluetooth Frequency125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
Product overview
Overview. The DFRobot DFR1075 FireBeetle 2 ESP32-C6 is a low-power IoT controller board designed for smart home automation, control and monitoring systems. It features a 32-bit single-core RISC-V processor running at 160 MHz, with 512 KB SRAM, 320 KB ROM, 16 KB RTC SRAM and 4 MB flash memory.
Wireless connectivity. The board supports Wi-Fi under IEEE 802.11b/g/n in the 2.4 GHz band, in Station, SoftAP and combined SoftAP+Station modes, as well as Bluetooth 5 with Bluetooth mesh. Bluetooth data rates listed range from 125 Kbps to 2 Mbps, and the data rate is 250 Kbps.
Interfaces and peripherals. A USB 2.0 CDC interface provides programming and serial communication, and the board includes an IR transceiver with two transmit and two receive channels. The DMA controller has three transmit and three receive channels. Support for 20 MHz and 40 MHz analog bandwidth is specified in the data.
Power and environment. Power is supplied through the Type-C input at 5 V DC, or through the VCC input at 5 V DC or a 5 V solar panel. The operating voltage is 3.3 V, the maximum charging current 0.5 A, and the operating temperature range -10 to 60 ℃. Dimensions are 25.4 x 60 mm.
Typical uses. Driving sensors and actuators in a home automation system, wireless communication gateway and IoT project prototyping, programmable with Arduino IDE or MicroPython.
DFRobot FireBeetle 2 ESP32-C6 IoT development board with a 160 MHz RISC-V processor, designed for low-power smart home automation, control and monitoring projects, with Wi-Fi, Bluetooth and 4 MB flash.
Operating Temperature-10~60℃
Type-C Input Voltage5V DC
VCC Input Voltage5V DC or 5V Solar Panel
Max Charging Current0.5A
Frequency band2.4GHz
2. Datasheet extract (recorded values)
Parameter
Value
Analog bandwidth
Support 20 MHz and 40 MHz at 2.4 GHz band
Frequency band
2.4GHz
Bluetooth Frequency
125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
Bluetooth protocol
Bluetooth 5, Bluetooth mesh
Data Rate
250Kbps
Dimension
25.4x60mm/1x2.36”
DMA Controller
transmit channel x3, receive channel x3
Flash
4MB
Frame Aggregation
TX/RX A-MPDU, TX/RX A-MSDU
IR Transceiver
transmit channel x2, receive channel x2
Main Frequency
160 MHz
Max Charging Current
0.5A
Operating Temperature
-10~60℃
Operating Voltage
3.3V
Processor
RISC-V single-core processor
ROM
320KB
RTC SRAM
16KB
SRAM
512KB
Type-C Input Voltage
5V DC
USB
USB 2.0 CDC
VCC Input Voltage
5V DC or 5V Solar Panel
WiFi Frequency
2.4GHz
WiFi Mode
Station, SoftAP, SoftAP+Station combined mode
WiFi Protocol
IEEE 802.11b/g/n
Integration
Points to check before using DFR1075 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Thermalrated operating range -10~60℃ — check it against the installation environment.
Power and communication
Max Charging Current
0.5A
Operating Voltage
3.3V
Type-C Input Voltage
5V DC
VCC Input Voltage
5V DC or 5V Solar Panel
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Thermal : rated operating range -10~60℃ — check it against the installation environment.
Applications and use cases
Architectures in which DFR1075 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for DFR1075 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productDFRobot
DFR1075
RISC-V IoT Development Board with Wi-Fi 6 and Bluetooth 5 2.4 GHz
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details